To express an interest in this machine please submit the form below.
Not Sure What Machine You Need?
Select Your Profile, We'll Match It
Choose your desired profile drawing, and let Machine Matcher connect you with the best roll forming machine tailored to your needs.
Browse Profiles
The Used Cut Line Shearing 8MM4000 is a robust and reliable industrial shear designed to meet the demanding requirements of metal fabrication. With a heavy-duty build, precision engineering, and a high cutting capacity, this machine is an ideal choice for manufacturers and fabricators looking for performance, durability, and value in one package.
Manufactured for versatility and engineered for accuracy, this shear offers substantial productivity benefits across a range of metalworking applications. Whether you're processing steel sheets for structural components or cutting aluminum panels for industrial enclosures, the 8MM4000 is built to deliver clean, precise cuts consistently.
The Used Cut Line Shearing 8MM4000 is a mechanical or hydraulic shear capable of handling large-format sheet metals. It is designed to perform one of the most fundamental processes in metalworking—shearing—with maximum accuracy and efficiency.
Shearing Type: Guillotine or swing beam shearing design (depending on the original build), suitable for high-volume straight-line cutting.
Applications: Ideal for use in fabrication shops, steel service centers, industrial production lines, and sheet metal workshops.
One of the most critical factors in evaluating a shear is its capacity. This machine's model number, 8MM4000, provides clear insights into its capabilities:
Maximum Cutting Thickness: 8 millimeters
This refers to the maximum thickness of mild steel the machine can cleanly shear in a single pass. It also makes the machine suitable for lighter or non-ferrous metals such as aluminum and stainless steel within a similar or slightly reduced thickness range.
Maximum Cutting Length: 4000 millimeters (4 meters)
The cutting bed accommodates large sheet sizes, minimizing the need for trimming or additional material handling. This capability is particularly useful for high-yield applications where full-sheet processing is desired.
This level of capacity makes the Used Cut Line Shearing 8MM4000 suitable for medium to heavy-duty metal cutting operations across a wide variety of industries.
Shearing requires a balance of force and finesse. This machine is built to maintain tight tolerances and minimize burrs, distortions, or edge deformation.
Precision Control: Designed for accurate cuts along the full length of the material. Shear blade gaps, rake angles, and cutting stroke lengths are likely adjustable depending on the build, enabling optimized cutting for different materials and thicknesses.
Metal Compatibility:
Mild Steel
Galvanized Steel
Aluminum
Stainless Steel
Other non-ferrous metals
Whether you are working in construction, HVAC, enclosure manufacturing, or general fabrication, this machine can help ensure that your material is cut cleanly, squarely, and ready for the next operation.
The Used Cut Line Shearing 8MM4000 is most likely powered by a hydraulic system or a mechanically geared drive—two of the most common and reliable systems in industrial shear designs. Each has advantages depending on operator preference and facility setup.
Hydraulic Shears: Offer smoother cutting actions, especially for thicker materials. Excellent for reducing vibration and improving operator control.
Mechanical Shears: Faster cycle speeds and lower maintenance in some cases. Common in setups where high cutting frequency is needed.
Blade Clearance Adjustment
Cutting Length Control
Programmable Settings (if equipped with a modern PLC)
Manual or CNC Control Panel
Modern machines may also include digital readouts and touchscreen interfaces, allowing operators to fine-tune the operation, improving efficiency and consistency across batches.
Industrial machinery must prioritize operator safety. This shearing machine is expected to be equipped with the following:
Safety Guards over moving blades and hazardous areas
Emergency Stop Buttons within operator reach
Interlock Systems to prevent access during operation
Two-Hand Control Systems (on some versions) to prevent accidental activation
These features help ensure compliance with international safety regulations and provide peace of mind to factory managers and machine operators alike.
Investing in a heavy-duty shearing machine like the 8MM4000 brings measurable efficiency gains:
Faster Turnaround: High shearing capacity means quicker processing of large sheets.
Lower Waste: Precision cutting reduces scrap and improves material yield.
Consistent Results: Reliable operation across long production runs.
Reduced Labor: Less manual correction and secondary processing required after shearing.
This machine is an excellent tool for companies that want to scale their production without compromising on cut quality or operator safety.
This Used Cut Line Shearing 8MM4000 is located in China and ready for inspection, packing, and shipment to any international location.
Depending on your preferred shipping method, estimated delivery is as follows:
Air Freight: Approximately 7–10 days
Sea Freight: Around 30–45 days, depending on destination and port clearance times
We coordinate with trusted logistics partners to ensure safe and timely transport, with all documentation handled professionally.
A: The machine can shear sheet metals up to 8mm thick, depending on the material type and tensile strength. Softer metals may allow slightly greater thickness, while harder alloys should be tested within spec.
A: It is capable of cutting mild steel, galvanized steel, aluminum, and stainless steel. For optimal performance, adjustments may be required for different materials.
A: This machine can shear sheets up to 4000 mm (4 meters) in length.
A: The specific model may vary. Most machines of this size and type are hydraulic for better control and force delivery. We recommend contacting us for detailed technical specifications.
A: This is a used machine. All used machinery is inspected and described accurately. If you need videos, photos, or inspection reports, we’re happy to provide them upon request.
A: Yes. On-site inspections in China can be arranged. Alternatively, we can arrange a remote video inspection for your convenience.
A: Yes, we provide setup guidance and available documentation. For certain machines, we can also assist with sourcing local technicians or offering commissioning services depending on your location.
A: A standard 8MM4000 shear will require space for the machine itself (approximately 5m x 2m) plus room for loading and unloading operations. We recommend a minimum operational footprint of around 25 square meters.
A: Machines are cleaned, packed, and secured in wooden crates or steel-framed shipping containers to ensure safe transit.
If you're searching for a specific shearing machine or any other metal fabrication equipment, Machine Matcher is here to help. With a vast international network of suppliers and partners, we can locate the exact machine that matches your specifications—even if it’s not currently listed.
If you’re interested in the Used Cut Line Shearing 8MM4000, or if you're searching for something else, contact us today:
UK: +44 20 335 56554
USA: +1 407 559 7948
Europe: +32 460 24 13 95
WhatsApp: +44 20 335 56554
Email: [email protected]
Our team is ready to help you find the right machine, answer technical questions, provide documentation, and arrange delivery—anywhere in the world.
