To express an interest in this machine please submit the form below.
Not Sure What Machine You Need?
Select Your Profile, We'll Match It
Choose your desired profile drawing, and let Machine Matcher connect you with the best roll forming machine tailored to your needs.
Browse Profiles
The Metal Flashing Roll Forming Machine – Algeria is a precision-engineered production line designed for manufacturing roof flashings, drip edges, trims, and wall cappings used in roofing and cladding systems. These components are vital for waterproofing, edge protection, and aesthetic finishing across residential, commercial, and industrial buildings.
At Machine Matcher, we supply new, fully automatic flashing roll forming machines custom-built to your profile drawings, coil specifications, and production goals. Each machine integrates PLC control, hydraulic cutting, and precision-ground rollers, ensuring smooth forming and consistent output across long production runs.
With Algeria’s rapid growth in construction, steel fabrication, and prefabricated building projects—particularly in Algiers, Oran, Blida, and Constantine—the need for locally manufactured roof flashings is growing. Our machines help Algerian producers achieve international quality standards while reducing material waste, downtime, and import costs.
Machine Matcher provides turnkey systems with global delivery, full setup, and 24/7 technical support—backed by service teams across Europe and the Middle East.
| Specification | Details |
|---|---|
| Machine Type: | Metal Flashing Roll Forming Machine |
| Production Speed: | 15–40 m/min (adjustable) |
| Material Thickness Range: | 0.3–1.0 mm |
| Material Width Range: | 100–600 mm (customizable) |
| Material Types: | Galvanized Steel (GI), Pre-painted Steel (PPGI), Aluminum, Stainless Steel, Copper |
| Material Yield Strength: | 235–550 MPa |
| Roller Material: | GCr15 bearing steel, hardened and hard-chromed |
| Roller Surface Treatment: | Precision-polished and plated to prevent scratching |
| Number of Forming Stations: | 10–22 stations (depending on profile complexity) |
| Roller Shaft Diameter: | 50–70 mm |
| Shaft Material: | 45# steel, precision-ground and heat-treated |
| Main Drive Type: | Gearbox or chain drive |
| Power (Algeria): | 380 V / 50 Hz / 3 Phase |
| Motor Power: | 7.5–15 kW |
| Cutting Method: | Hydraulic post-cut or flying shear |
| Blade Material: | Cr12MoV high-strength tool steel |
| Control Type: | PLC with HMI touchscreen (Siemens / Delta / Mitsubishi) |
| Operating Mode: | Fully automatic with manual override |
| De-coiling System: | 3–10 ton manual or hydraulic uncoiler |
| Machine Frame: | 300–400 H-beam welded steel |
| Thickness of Frame Steel: | 16–20 mm |
| Profile Shape: | Drip edge, ridge cap, J-trim, corner flashing, or custom |
| Profile Width & Depth: | Width 100–600 mm; Depth 10–60 mm |
| Length Tolerance: | ±1 mm / m |
| Safety Features: | Emergency stop, overload protection, safety guards |
| Protective Covers: | Transparent or steel covers for operator safety |
| Overload Protection System: | Integrated within main motor and hydraulics |
Servo feeding and encoder synchronization
Hydraulic punching and notching units
Dual-decoiler for continuous operation
Remote PLC diagnostic system (Ewon / PLCRemote)
Coil car and hydraulic coil tilter
Automatic stacker and counting system
Safety sound-insulated enclosure
Auto-lubrication and cleaning system
Quick-change roller setup for multiple flashing designs
All systems are factory-tested and certified before shipping, supplied with test videos, installation manuals, and wiring diagrams.
Metal flashings are thin, folded steel or aluminum strips used to seal and protect joints, roof edges, and wall intersections. They prevent water ingress and enhance the finished look of roofing systems.
Drip Edge Flashing: Directs water away from roof fascia.
Ridge Cap Flashing: Seals the roof peak and overlaps panels.
Sidewall / Endwall Flashing: Protects roof-to-wall intersections.
Corner and J-Trim Flashings: Finishes vertical or horizontal edges.
Valley Flashing: Directs runoff between roof slopes.
Base Flashing: Installed along roof perimeters and foundations.
Width: 100–600 mm
Depth (fold height): 10–60 mm
Material Gauge: 0.3–1.0 mm
Length: Programmable up to 6 m
Pre-painted Steel (PPGI): Aesthetic and corrosion-resistant
Galvanized Steel (GI): Economical, durable for standard roofs
Aluminum: Lightweight and non-corrosive
Copper / Stainless Steel: Premium flashing for architectural projects
Flashings are essential for:
Metal roofing manufacturers
Cladding and façade installers
Steel structure and prefab builders
Residential roofing contractors
Commercial and industrial construction
Agricultural and warehouse roofing projects
In Algeria’s coastal and semi-arid climates, flashings provide vital protection against rain, sand, and heat. The demand for locally produced roof accessories has increased with major housing and infrastructure programs supported by national and private developers.
Machine Matcher enables Algerian producers to deliver international-quality roofing components for both domestic and export markets.
Every machine is delivered pre-assembled, calibrated, and tested before shipment.
Setup Steps
Position machine on a leveled concrete base.
Connect hydraulic and electrical systems.
Load coil and adjust feeding guides.
Calibrate roller pressure and length encoder.
Produce test runs and verify bending angles.
Machine Matcher provides:
Remote installation support via video or PLC link
On-site commissioning and training (available in Algeria & North Africa)
Comprehensive manuals and video tutorials
Proper maintenance ensures longevity and precision.
Daily
Clean rollers, guides, and cutting area.
Inspect oil level and remove debris.
Weekly
Lubricate bearings and chains.
Check encoder and sensor accuracy.
Monthly
Inspect hydraulic seals and hoses.
Tighten all bolts and electrical connections.
Annually
Re-align roller stations.
Replace hydraulic oil and filters.
Perform a complete PLC diagnostic test.
Machine Matcher offers:
OEM spare parts kits
Preventive maintenance plans
Remote troubleshooting and PLC updates
24/7 worldwide support
Pricing depends on automation level, profile complexity, and material thickness.
| Model Type | Configuration | Approx. Price (USD) |
|---|---|---|
| Basic Model | Manual uncoiler, post-cut, basic PLC | $40,000 – $60,000 |
| Mid-Range Model | Hydraulic uncoiler, servo feeding, auto cutting | $60,000 – $85,000 |
| High-End Model | Full servo system, dual-decoiler, auto stacker | $85,000 – $120,000 + |
All quotes include:
Custom profile design confirmation
Test videos before dispatch
Export packaging and documentation
Optional on-site installation and training
Machine Matcher supplies metal flashing roll forming machines to:
Algeria
Tunisia
Morocco
Egypt
Mauritania
France
Italy
Middle East and Europe
All machines are CE and ISO certified, compatible with 380 V / 50 Hz / 3-phase power systems used in North Africa.
Machines custom-engineered for your flashing profiles
CE & ISO-certified design and manufacturing
24/7 technical and PLC remote support
Local service and installation teams in North Africa
OEM spare parts and fast global delivery
Detailed inspection and pre-shipment testing
Offices in UK, USA, and Middle East for global coverage
Machine Matcher delivers complete roll forming solutions that combine precision engineering, automation, and long-term reliability for Algerian manufacturers.
Q1: What is a metal flashing roll forming machine?
A: It’s an automated line that forms flat metal coils into various roof flashing and trim profiles used for sealing and finishing metal roofs and walls.
Q2: Can one machine produce multiple flashing types?
A: Yes. With adjustable roller tooling or interchangeable cassettes, one machine can form several flashing designs.
Q3: What materials are ideal for Algeria’s environment?
A: Pre-painted and galvanized steel are preferred for inland areas, while aluminum or stainless steel is best for coastal zones due to humidity and salt air.
Q4: What production speed can be achieved?
A: Standard speed ranges from 15 – 40 m/min, depending on profile and thickness.
Q5: How long does installation take?
A: Typically 3–5 working days, including calibration and operator training.
Q6: What support does Machine Matcher provide after purchase?
A: We offer remote PLC diagnostics, on-site service, spare parts supply, and preventive maintenance plans.
For technical consultation or quotations:
Machine Matcher
Global Roll Forming Machine Specialists
United Kingdom (Main Office)
Phone: +44 20 335 56554
United States
Phone: +1 407 559 7948
Mobile / WhatsApp: +44 7816 972935
Email: [email protected]
Copyright 2025 © Machine Matcher.
