Most Popular Roll Forming Machines in Mozambique

Mozambique's construction and manufacturing sectors are expanding, with metal roofing, steel framing, and infrastructure projects gaining momentum across cities like Maputo, Beira, Nampula, and Tete. As demand grows, roll forming machines are becoming essential for companies producing metal profiles for roofing, wall panels, steel framing, and more.

In this guide, we explore the most popular roll forming machines in Mozambique, including machine types and specifications, the metal profiles they produce, industries using them, regional usage, maintenance needs, machine costs, top manufacturers, and tips on setup and operation. We’ll also share how Machine Matcher can help you find the right machine for your business.

1. Popular Types of Roll Forming Machines in Mozambique

A. Roofing Sheet Roll Forming Machines

Used For: IBR profiles, corrugated sheets, trapezoidal panels
Specifications:

• Rollers: GCr15 steel, heat-treated and chromed

• Motor Power: 5.5kW–11kW depending on line

• Cutting System: Hydraulic guillotine cutter

• Machine Speed: 8–20 meters/min

• Control System: PLC with touch screen (Delta or Siemens)

• Forming Stations: 16–24 steps Applications: Residential, commercial, and industrial roofing

B. C Purlin Roll Forming Machines

Used For: Adjustable production of C and U purlins
Specifications:

• Material Thickness: 1.5–3.2 mm

• Rollers: High-tensile alloy steel

• Hydraulic Power Pack: 5.5kW or higher

• Profile Width: 80mm–300mm adjustable
  Applications: Structural framing for warehouses, buildings, agricultural sheds

C. Ridge Cap Roll Forming Machines

Used For: Ridge cover at roof intersections
Specifications:

• Material Width: 300mm–600mm

• Thickness Range: 0.3–0.7 mm

• Cutting System: Hydraulic shear

• Speed: 10–15 m/min
  Applications: Roofing finishes, metal building roofs

D. Downpipe and Gutter Roll Forming Machines

Used For: Metal rainwater gutters and downspouts
Specifications:

• Profile Types: Round, square, or rectangular

• Material: Galvanized, painted steel, aluminum

• Cutting: Hydraulic or flying cut-off
  Applications: Water drainage systems in residential and commercial buildings

E. Steel Door Frame Roll Forming Machines

Used For: Door frames for security and commercial steel doors
Specifications:

• Material Thickness: 1.0–1.5 mm

• Punching Units: Optional hydraulic punching

• Control System: PLC
  Applications: Housing, institutions, commercial buildings

2. Profiles Commonly Used in Mozambique

The most common metal profiles manufactured using roll forming machines in Mozambique include:

• IBR Roof Sheets – Widely used for roofing in urban and rural construction

• Corrugated Panels – Traditional roofing style for homes and industrial sheds

• Trapezoidal Panels – For roofing and cladding applications

• C & Z Purlins – For structural framing in large span buildings

• Gutters & Downpipes – For roof water drainage

• Ridge Caps – Used to seal roof ridges

• Steel Door Frames – For residential and commercial steel doors

These profiles are made using galvanized steel, color-coated steel, or aluminum, with gauges ranging from 0.3 mm to 1.5 mm.

3. Key Industries Using Roll Forming Machines

Roll forming machines are essential to several fast-growing sectors in Mozambique:

• Construction & Real Estate – Roofing, wall cladding, door frames, gutters

• Steel Fabrication Workshops – Custom profile manufacturing

• Agricultural Infrastructure – Warehouses, barns, irrigation structures

• Telecom & Utility Companies – Enclosures, support structures

• Government Projects – Schools, housing, public buildings

4. Main Cities and Regions Using Roll Forming Machines

Mozambique’s urban centers and economic hubs show the highest usage of roll forming machines:

• Maputo – The capital city and main commercial hub

• Matola – Industrial and logistics developments

• Beira – Port city with growing infrastructure needs

• Nampula – Northern growth hub with regional projects

• Tete – Mining and energy development region

• Chimoio & Quelimane – Mid-sized cities with growing housing and industrial demand

These areas host construction firms, metal fabricators, and steel structure producers that heavily rely on roll forming equipment.

5. Maintenance Requirements

To keep roll forming machines running efficiently in Mozambique’s often dusty and humid environments, proper maintenance is crucial.

Daily Maintenance:

• Check and clean rollers

• Remove debris from cutting area

• Check oil levels in the hydraulic unit

Weekly Maintenance:

• Inspect electrical connections and PLC wiring

• Lubricate chains and gear drives

Monthly Maintenance:

• Replace hydraulic oil filter

• Inspect roller alignment and adjust if needed

• Tighten loose bolts and fasteners

Annual Maintenance:

• Full inspection of roller wear and shaft integrity

• Service PLC control unit and update firmware

• Replace any worn-out parts like bearings or seals

6. Setup and Operation of Roll Forming Machines

Setup Process:

1. Uncoil the steel coil using an automatic or manual uncoiler

2. Feed the coil into the entry guide of the roll forming machine

3. Adjust roller gaps for the correct material thickness

4. Connect to power (typically 380V/50Hz in Mozambique, confirm before purchase)

5. Load profile settings into the PLC system

6. Run test strips and fine-tune cutting length, bending angles

Operation Tips:

• Always calibrate after coil changes

• Monitor hydraulic pressure regularly

• Save profile recipes on the PLC for repeat jobs

• Train staff on emergency stops and troubleshooting

7. Machine Price Range in Mozambique

Roll forming machine prices vary widely based on complexity, automation level, and included features.

Note: Prices vary based on brand, motor power, speed, cutting system, and additional features like punching, stackers, or remote diagnostics.

8. Main Roll Forming Machine Manufacturers in Mozambique

While Mozambique doesn’t currently have a large number of local manufacturers, most machines are imported from South Africa, China, India, and Europe.

Local resellers and regional agents offer machines under the following brands:

• Xiamen Liming

• Zhongyuan Roll Forming

• Formtek Group

• Samco Machinery

• Metform

• Rollforming Services South Africa

Before buying, ensure that spare parts and service support are available locally or regionally.

9. How Machine Matcher Can Help You

Buying the right roll forming machine in Mozambique can be challenging, especially when trying to match machine specifications with local profile needs. That’s where Machine Matcher makes a difference.

Why Work with Machine Matcher?

• Expert Matching: We recommend machines that suit your profile drawing, material thickness, and production needs

• New and Used Machines: Access affordable machines at different price points

• Support for Mozambique: We understand the local power requirements, climate, and industrial demands

• Verified Manufacturers: We only deal with trusted global machine builders

• Shipping & Installation Support: Assistance with delivery, setup, and training

• After-Sales Service: We connect you with support services to maintain machine performance

10. Frequently Asked Questions (Q&A)

Q: Can I use single-phase power for roll forming machines in Mozambique?
A: Most machines require three-phase 380V power. Always confirm your local power supply before ordering.

Q: Can one roll forming machine produce multiple profiles?
A: Some advanced models offer interchangeable tooling or adjustable roll sets, but most standard machines are dedicated to one profile for accuracy.

Q: How long does it take to install a roll forming machine?
A: Installation typically takes 3–5 days with training. We recommend professional setup to avoid misalignment.

Q: What kind of steel coil is best for roofing panels?
A: Pre-painted galvanized steel or AZ-coated steel in thicknesses between 0.3–0.5 mm is ideal for roofing.

Q: Can I import a used roll forming machine to Mozambique?
A: Yes, and Machine Matcher can help you source high-quality used machines with verified history and tested performance.

Contact Machine Matcher

Speak to one of our roll forming machine experts today:

UK: +44 20 335 56554
USA: +1 407 559 7948
Europe: +32 460 24 13 95
WhatsApp: +44 20 335 56554
Email: [email protected]