Architectural Standing Seam Roll Forming Machine Data Sheet | Specifications & Capacity

Architectural Standing Seam Roll Forming Machine Technical Data Sheet

Machine Overview

Parameter Specification
Machine Name Architectural Standing Seam Roll Forming Machine
Profile Produced Architectural Standing Seam Metal Roof Panel
Machine Type Single profile / Adjustable profile machine
Production Application Architectural roofing, residential roofing, commercial metal roofing systems
Manufacturing Process Continuous cold roll forming
Production Environment Factory production line / portable job site machine / containerized system

The architectural standing seam roll forming machine produces high-precision standing seam roofing panels used in modern architectural metal roofing systems. These panels provide a clean appearance with concealed fasteners and superior weather resistance.

Production Specifications

Specification Typical Value
Production Speed 10–35 m/min
Forming Stations 18–26 stations
Material Thickness Range 0.4–0.8 mm
Coil Width 400–650 mm
Coil Weight Capacity 3–8 tons
Cut Length Tolerance ±1 mm
Minimum Panel Length 500 mm
Maximum Panel Length Unlimited

Architectural standing seam machines are commonly used for producing panels directly on construction sites to eliminate transportation limitations.

Material Compatibility

Material Type Supported
Galvanized Steel Yes
Pre-painted Steel Yes
Galvalume Steel Yes
Aluminum Yes
Copper Yes
Zinc Optional

Architectural standing seam roofing systems often use premium metals for aesthetics and corrosion resistance.

Material Strength

Property Typical Range
Yield Strength G250 – G550
Tensile Strength Up to 550 MPa
Coating Types PVDF coatings, SMP coatings, Galvalume AZ150

High-performance coatings ensure long-term durability and architectural appearance.

Machine Frame Construction

Component Specification
Frame Type Precision welded structural steel frame
Frame Plate Thickness 14–22 mm
Machine Base Heavy duty fabricated steel base
Frame Alignment Precision machined mounting surfaces
Machine Weight 7–13 tons

The machine frame ensures high dimensional accuracy for architectural panel production.

Roll Tooling Specifications

Specification Typical Value
Roller Material GCr15 bearing steel
Heat Treatment HRC 58–62
Roller Diameter 65–90 mm
Shaft Diameter 70–90 mm
Shaft Material 40Cr alloy steel
Surface Finish Hard chrome plating
Roll Pass Design Progressive standing seam forming
Forming Stages 18–26 stations

Roll tooling gradually forms the flat pan, ribs, and seam geometry of the standing seam profile.

Drive System

Component Specification
Drive Type Chain drive / gearbox drive
Main Motor 7.5–15 kW
Drive Ratio 1:20
Transmission Industrial gearbox
Lubrication Oil bath gearbox

The drive system ensures consistent panel forming and accurate seam dimensions.

Hydraulic Cutting System

Component Specification
Cutting Type Hydraulic flying shear
Blade Material Cr12 tool steel
Cutting Accuracy ±1 mm
Hydraulic Pressure 10–16 MPa
Hydraulic Motor 4–5.5 kW

Flying shear cutting allows continuous production while maintaining precise panel lengths.

Control System

Component Specification
PLC Siemens / Delta / Mitsubishi
HMI Industrial touch screen interface
Length Measurement Rotary encoder system
Control Accuracy ±1 mm
Automation Fully automatic production

Control functions include:

Automatic panel length control
Batch production programming
Fault monitoring and diagnostics
Emergency stop system

Electrical Specifications

Parameter Value
Voltage 380V / 415V / 480V
Frequency 50 Hz / 60 Hz
Control Voltage 24V
Electrical Cabinet IP54 industrial enclosure
Protection Overload protection and circuit breakers

Machine Layout Dimensions

Parameter Value
Machine Length 8–12 m
Machine Width 1.5–2 m
Machine Height 1.5–2 m
Total Production Line Length 14–20 m

Typical production line configuration:

Uncoiler → Standing Seam Roll Forming Machine → Hydraulic Shear → Run-out Table

Portable systems may combine compact coil handling equipment.

Coil Handling Equipment

Specification Value
Uncoiler Type Manual or hydraulic decoiler
Coil Capacity 3–8 tons
Coil Inner Diameter 450–550 mm
Coil Outer Diameter Up to 1500 mm
Expansion Type Hydraulic expansion

Optional Equipment

Equipment Description
Automatic Stacker Automated panel stacking system
Portable Roll Former Job-site roll forming machine
Coil Car Automatic coil loading system
Servo Feeder Precision feeding system
Remote PLC Monitoring Remote diagnostics and monitoring

Installation Requirements

Requirement Typical
Foundation Reinforced concrete floor
Floor Load Capacity 5–8 tons
Electrical Connection Three phase industrial power supply
Air Supply Optional
Installation Time 2–3 days

Portable machines require minimal installation.

Maintenance Requirements

Component Maintenance Interval
Gearbox Oil Every 6 months
Bearings Every 6 months
Hydraulic Oil Every 12 months
Roll Tooling Inspection Monthly

Routine maintenance ensures consistent panel quality and machine reliability.

Production Capacity Example

Production Speed Output
15 m/min 900 m/hour
20 m/min 1200 m/hour
30 m/min 1800 m/hour

Actual production output depends on panel length and material thickness.

Architectural Standing Seam Profile Information

Specification Value
Panel Coverage Width 300–450 mm
Seam Height 25–65 mm
Fastening Method Concealed clip fastening system
Typical Gauge 26–24 gauge

Architectural standing seam panels are designed for aesthetics, durability, and weather resistance.

Machine Standards

Standard Description
CE Certification European machinery safety standards
ISO 9001 Manufacturing quality management
Electrical Compliance Industrial electrical safety standards

Shipping Information

Specification Value
Container Size 40 ft container
Shipping Weight 10–14 tons
Packaging Industrial export packing

Portable machines may ship in smaller containers.

Typical Machine Price Range

Machine Type Price Range
Standard Line $45,000 – $70,000
Automatic Line $70,000 – $100,000
High Speed Line $110,000+

Pricing varies depending on machine configuration, automation level, and profile flexibility.

Applications

Industry Use
Residential Roofing Homes and residential buildings
Architectural Buildings Modern architectural metal roofs
Commercial Buildings Office and retail structures
Institutional Buildings Schools, universities, and public buildings

Architectural standing seam roofing systems are widely used worldwide due to their modern appearance, long lifespan, and superior weatherproof performance.