Deep Deck Roll Forming Machine Data Sheet | Technical Specifications
Deep Deck Roll Forming Machine Technical Data Sheet
Machine Overview
Parameter Specification
Machine Name Deep Deck Roll Forming Machine
Profile Produced Deep Rib Structural Deck Panels
Machine Type Single profile or structural deck roll forming machine
Production Application Long span floor decking, structural concrete floor systems
Manufacturing Process Continuous cold roll forming
Production Environment Factory production line / steel building manufacturing facility
The deep deck roll forming machine produces structural steel deck panels with deep ribs designed for long span floor systems. Deep deck profiles provide higher load capacity compared to standard floor decking and are commonly used in large steel frame structures.
Deep decking systems are widely used in commercial buildings, industrial facilities, parking structures, and high-rise construction projects.
Production Specifications
Specification Typical Value
Production Speed 8–20 m/min
Forming Stations 20–30 stations
Material Thickness Range 1.0–2.0 mm
Coil Width 900–1250 mm
Coil Weight Capacity 8–20 tons
Cut Length Tolerance ±1 mm
Minimum Deck Length 1000 mm
Maximum Deck Length Unlimited
Deep deck machines are designed to handle thicker structural steel and produce deep rib profiles with precise dimensional control.
Material Compatibility
Material Type Supported
Galvanized Steel Yes
High Strength Structural Steel Yes
Galvalume Steel Optional
Pre-painted Steel Optional
Stainless Steel Limited
Galvanized structural steel is commonly used to provide corrosion resistance in structural deck systems.
Material Strength
Property Typical Range
Yield Strength G350 – G550
Tensile Strength Up to 550 MPa
Coating Types Galvanized Z275 – Z450
High-strength steel provides the load capacity required for long span structural decking systems.
Machine Frame Construction
Component Specification
Frame Type Heavy duty welded structural steel frame
Frame Plate Thickness 25–35 mm
Machine Base Reinforced fabricated steel base
Frame Alignment Precision machined mounting surfaces
Machine Weight 25–45 tons
The heavy-duty machine frame provides stability during the forming of deep structural decking profiles.
Roll Tooling Specifications
Specification Typical Value
Roller Material GCr15 bearing steel
Heat Treatment HRC 58–62
Roller Diameter 110–150 mm
Shaft Diameter 100–130 mm
Shaft Material 40Cr alloy steel
Surface Finish Hard chrome plating
Roll Pass Design Deep structural deck forming system
Forming Stages 20–30 stations
Roll tooling progressively forms the deep ribs and structural shapes required for deep deck panels.
Drive System
Component Specification
Drive Type Gearbox drive system
Main Motor 30–55 kW
Drive Ratio 1:20
Transmission Heavy duty industrial gearbox
Lubrication Oil bath gearbox
The gearbox drive system provides high torque for forming thicker structural steel materials.
Hydraulic Cutting System
Component Specification
Cutting Type Hydraulic flying shear or hydraulic post cut
Blade Material Cr12 tool steel
Cutting Accuracy ±1 mm
Hydraulic Pressure 14–22 MPa
Hydraulic Motor 7.5–15 kW
Hydraulic cutting ensures precise deck panel lengths during continuous production.
Control System
Component Specification
PLC Siemens / Mitsubishi / Delta
HMI Industrial touch screen interface
Length Measurement Rotary encoder system
Control Accuracy ±1 mm
Automation Fully automatic production
Control functions include:
Automatic deck length control
Batch production programming
Production monitoring
Fault diagnostics
Emergency stop system
Electrical Specifications
Parameter Value
Voltage 380V / 415V / 480V
Frequency 50 Hz / 60 Hz
Control Voltage 24V
Electrical Cabinet IP54 industrial enclosure
Protection Overload protection and circuit breakers
Machine Layout Dimensions
Parameter Value
Machine Length 16–25 m
Machine Width 2.5–3.5 m
Machine Height 2–3 m
Total Production Line Length 30–45 m
Typical production line configuration:
Uncoiler → Leveling System → Embossing Unit → Roll Forming Machine → Hydraulic Cutting → Run-out Table
Coil Handling Equipment
Specification Value
Uncoiler Type Hydraulic decoiler
Coil Capacity 10–20 tons
Coil Inner Diameter 450–550 mm
Coil Outer Diameter Up to 1800 mm
Expansion Type Hydraulic expansion system
Optional Equipment
Equipment Description
Embossing System Concrete bonding embossments
Automatic Stacker Automatic deck stacking system
Coil Car Automatic coil loading system
Servo Feeder Precision feeding system
Remote PLC Monitoring Remote diagnostics and monitoring
Embossing improves bonding between steel decking and concrete in composite floor systems.
Installation Requirements
Requirement Typical
Foundation Heavy reinforced concrete foundation
Floor Load Capacity 25–45 tons
Electrical Connection Three phase industrial power supply
Air Supply Optional
Installation Time 4–5 days
Maintenance Requirements
Component Maintenance Interval
Gearbox Oil Every 6 months
Bearings Every 6 months
Hydraulic Oil Every 12 months
Roll Tooling Inspection Monthly
Routine maintenance ensures reliable machine performance and consistent deck quality.
Production Capacity Example
Production Speed Output
8 m/min 480 m/hour
12 m/min 720 m/hour
20 m/min 1200 m/hour
Production capacity depends on deck depth and material thickness.
Deep Deck Profile Information
Specification Value
Coverage Width 600–900 mm
Rib Height 75–150 mm
Rib Spacing 150–300 mm
Material Thickness 1.0–2.0 mm
Deep deck panels provide high load capacity and long span support for structural floor systems.
Machine Standards
Standard Description
CE Certification European machinery safety standards
ISO 9001 Manufacturing quality management
Electrical Compliance Industrial electrical safety standards
Shipping Information
Specification Value
Container Size 40 ft container or multiple containers
Shipping Weight 28–45 tons
Packaging Industrial export packing
Typical Machine Price Range
Machine Type Price Range
Basic Line $180,000 – $250,000
Automatic Structural Line $250,000 – $350,000
Heavy Duty High Speed Line $380,000+
Pricing depends on automation level, deck profile depth, and structural forming capacity.
Applications
Industry Use
Commercial Construction Long span composite floor systems
High-Rise Buildings Deep structural floor decking
Industrial Buildings Heavy load mezzanine floors
Infrastructure Projects Structural concrete slab support
Deep deck roll forming machines are widely used in structural steel construction because they produce high load capacity decking panels designed for long span floor systems in large buildings.