Livestock Building Panel Roll Forming Machine Data Sheet | Technical Specifications
Livestock Building Panel Roll Forming Machine Technical Data Sheet
Machine Overview
Parameter Specification
Machine Name Livestock Building Panel Roll Forming Machine
Profile Produced Livestock building roof and wall panels
Machine Type Single profile / double layer livestock panel roll forming machine
Production Application Livestock barns, poultry houses, dairy buildings and farm structures
Manufacturing Process Continuous cold roll forming
Production Environment Metal roofing manufacturing plant / agricultural building component factory
Livestock building panel roll forming machines produce metal roof and wall panels designed for farm buildings that house animals such as cattle, poultry, pigs and sheep. These panels provide durable weather protection and ventilation support for agricultural structures.
Panels used in livestock buildings must withstand moisture, ammonia exposure, and varying weather conditions.
Production Specifications
Specification Typical Value
Production Speed 10–35 m/min
Forming Stations 16–24 stations
Material Thickness Range 0.35–0.8 mm
Coil Width 900–1250 mm
Coil Weight Capacity 5–10 tons
Cut Length Tolerance ±1 mm
Minimum Panel Length 500 mm
Maximum Panel Length Unlimited
Livestock building panels are often produced in long lengths to minimize roof and wall joints.
Material Compatibility
Material Type Supported
Galvanized Steel Yes
Pre-painted Steel Yes
Galvalume Steel Yes
Aluminum Optional
Stainless Steel Limited
Galvanized and coated steels are commonly used due to their corrosion resistance in agricultural environments.
Material Strength
Property Typical Range
Yield Strength G250 – G550
Tensile Strength Up to 550 MPa
Coating Types Z275 galvanized / AZ150 Galvalume / polyester coating
These coatings help protect panels from corrosion caused by humidity and livestock environments.
Machine Frame Construction
Component Specification
Frame Type Welded structural steel frame
Frame Plate Thickness 16–25 mm
Machine Base Heavy duty fabricated steel base
Frame Alignment Precision machined mounting surfaces
Machine Weight 8–15 tons
Rigid machine construction ensures stable panel forming and long equipment life.
Roll Tooling Specifications
Specification Typical Value
Roller Material GCr15 bearing steel
Heat Treatment HRC 58–62
Roller Diameter 70–95 mm
Shaft Diameter 75–90 mm
Shaft Material 40Cr alloy steel
Surface Finish Hard chrome plating
Roll Pass Design Livestock building panel forming system
Forming Stages 16–24 stations
Roll tooling progressively shapes steel strip into livestock building panel profiles.
Drive System
Component Specification
Drive Type Chain drive / gearbox drive
Main Motor 7.5–15 kW
Drive Ratio 1:20
Transmission Industrial gearbox
Lubrication Oil bath gearbox
Drive systems provide smooth and consistent forming during panel production.
Hydraulic Cutting System
Component Specification
Cutting Type Hydraulic flying shear
Blade Material Cr12 tool steel
Cutting Accuracy ±1 mm
Hydraulic Pressure 10–16 MPa
Hydraulic Motor 4–5.5 kW
Hydraulic cutting ensures accurate panel lengths and clean edges.
Control System
Component Specification
PLC Siemens / Delta / Mitsubishi
HMI Touch screen operator interface
Length Measurement Rotary encoder length measurement
Control Accuracy ±1 mm
Automation Fully automatic production line
Control system functions include:
Automatic length control
Batch production programming
Production monitoring
Fault diagnostics
Emergency stop system
Electrical Specifications
Parameter Value
Voltage 380V / 415V / 480V
Frequency 50 Hz / 60 Hz
Control Voltage 24V
Electrical Cabinet IP54 industrial enclosure
Protection Overload protection and circuit breakers
Machine Layout Dimensions
Parameter Value
Machine Length 8–12 m
Machine Width 1.5–2 m
Machine Height 1.5–2 m
Total Production Line Length 15–25 m
Typical production line configuration:
Uncoiler → Entry guide → Roll forming machine → Hydraulic cutting → Run-out table
Coil Handling Equipment
Specification Value
Uncoiler Type Manual or hydraulic decoiler
Coil Capacity 5–10 tons
Coil Inner Diameter 450–550 mm
Coil Outer Diameter Up to 1500 mm
Expansion Type Manual or hydraulic expansion
Optional Equipment
Equipment Description
Automatic Stacker Panel stacking system
Double Layer System Two panel profiles in one machine
Servo Feeder Precision feeding system
Coil Car Automatic coil loading system
Remote PLC Monitoring Remote diagnostics and monitoring
Automation options improve production efficiency and reduce labor requirements.
Installation Requirements
Requirement Typical
Foundation Reinforced concrete floor
Floor Load Capacity 8–15 tons
Electrical Connection Three phase industrial power supply
Air Supply Optional
Installation Time 2–3 days
Maintenance Requirements
Component Maintenance Interval
Gearbox Oil 6 months
Bearings 6 months
Hydraulic Oil 12 months
Roll Tooling Inspection Monthly
Routine maintenance ensures reliable livestock panel production.
Production Capacity Example
Production Speed Output
10 m/min 600 m/hour
20 m/min 1200 m/hour
35 m/min 2100 m/hour
Production capacity varies depending on panel profile design and steel thickness.
Livestock Building Panel Profile Information
Specification Value
Panel Type Livestock building roof and wall panel
Typical Coverage Width 750–1000 mm
Rib Height 20–40 mm
Material Thickness 0.35–0.8 mm
These panels are designed to provide ventilation compatibility and structural durability for livestock buildings.
Machine Standards
Standard Description
CE Certification European machinery safety standards
ISO 9001 Manufacturing quality management
Electrical Standards Industrial electrical safety compliance
Livestock building panel roll forming machines produce metal panels used in agricultural building construction worldwide.
Shipping Information
Specification Value
Container Size 40 ft container
Shipping Weight 10–16 tons
Packaging Industrial export packing
Typical Machine Price Range
Machine Type Price Range
Basic Line $45,000 – $70,000
Automatic Line $70,000 – $100,000
High Speed Line $100,000+
Pricing depends on production speed, automation level, and panel profile complexity.
Applications
Industry Use
Agriculture Livestock barns and shelters
Poultry Farming Poultry houses and farm buildings
Dairy Farming Dairy barns and milking facilities
Rural Construction Agricultural warehouses and storage buildings
Livestock building panel roll forming machines are widely used by manufacturers producing metal roof and wall panels used in agricultural livestock housing and farm infrastructure worldwide.