Steel Cabinet Frame Roll Forming Machine Data Sheet | Technical Specifications
Steel Cabinet Frame Roll Forming Machine Technical Data Sheet
Machine Overview
Parameter Specification
Machine Name Steel Cabinet Frame Roll Forming Machine
Profile Produced Cabinet frame structural profiles and cabinet support channels
Machine Type Single profile / multi profile cabinet frame roll forming machine
Production Application Office cabinets, storage cabinets, filing cabinets and industrial cabinets
Manufacturing Process Continuous cold roll forming with punching capability
Production Environment Furniture manufacturing plants / metal fabrication factories
Steel cabinet frame roll forming machines produce structural profiles used in the internal framework of cabinets and storage furniture. These frames provide structural rigidity for metal cabinets used in offices, workshops, warehouses and commercial storage systems.
Cabinet frame profiles typically include folded edges, reinforcement ribs and assembly holes.
Production Specifications
Specification Typical Value
Production Speed 15–35 m/min
Forming Stations 14–22 stations
Material Thickness Range 0.6–2.0 mm
Coil Width 80–250 mm
Coil Weight Capacity 3–5 tons
Cut Length Tolerance ±1 mm
Minimum Profile Length 300 mm
Maximum Profile Length 3000 mm
Cabinet frame production requires accurate forming and punching for fast assembly during cabinet manufacturing.
Material Compatibility
Material Type Supported
Cold Rolled Steel Yes
Galvanized Steel Yes
Pre-painted Steel Optional
Stainless Steel Optional
Aluminum Optional
Cold rolled steel is commonly used for cabinet frames due to its smooth finish suitable for powder coating.
Material Strength
Property Typical Range
Yield Strength G200 – G450
Tensile Strength Up to 550 MPa
Coating Types Painted / powder coated / galvanized
These materials provide strength and corrosion resistance for cabinet structures.
Machine Frame Construction
Component Specification
Frame Type Welded structural steel frame
Frame Plate Thickness 16–22 mm
Machine Base Heavy fabricated steel base frame
Frame Alignment Precision machined mounting surfaces
Machine Weight 9–14 tons
A rigid frame structure ensures stable forming and high dimensional accuracy.
Roll Tooling Specifications
Specification Typical Value
Roller Material GCr15 bearing steel
Heat Treatment HRC 58–62
Roller Diameter 60–90 mm
Shaft Diameter 70–85 mm
Shaft Material 40Cr alloy steel
Surface Finish Hard chrome plating
Roll Pass Design Cabinet frame profile forming design
Forming Stages 14–22 stations
Roll tooling gradually forms metal strip into cabinet frame structural channels.
Drive System
Component Specification
Drive Type Chain drive / gearbox drive
Main Motor 7.5–15 kW
Drive Ratio 1:20
Transmission Industrial gearbox
Lubrication Oil bath gearbox
The drive system provides stable forming speed and reliable production.
Hydraulic Cutting System
Component Specification
Cutting Type Hydraulic flying cut or post cut
Blade Material Cr12 tool steel
Cutting Accuracy ±1 mm
Hydraulic Pressure 10–16 MPa
Hydraulic Motor 4–7.5 kW
Hydraulic cutting ensures accurate cabinet frame lengths.
Punching System
Component Specification
Punch Type Hydraulic punching unit
Application Assembly holes, mounting holes and hinge connection points
Punch Capacity 25–50 tons
Punching Speed Synchronized with forming line
Punching systems create holes required for cabinet assembly and hardware installation.
Control System
Component Specification
PLC Siemens / Delta / Mitsubishi
HMI Touch screen interface
Length Measurement Rotary encoder system
Control Accuracy ±1 mm
Automation Fully automatic operation
Control system functions include:
Automatic length control
Punch pattern programming
Batch production programming
Production monitoring
Fault diagnostics
Emergency stop system
Electrical Specifications
Parameter Value
Voltage 380V / 415V / 480V
Frequency 50 Hz / 60 Hz
Control Voltage 24V
Electrical Cabinet IP54 industrial enclosure
Protection Overload protection and circuit breakers
Machine Layout Dimensions
Parameter Value
Machine Length 10–14 m
Machine Width 1.6–2 m
Machine Height 1.5–2 m
Total Production Line Length 16–20 m
Typical production layout:
Uncoiler → Leveling System → Punching System → Roll Forming Machine → Hydraulic Cutting → Run-out Table
Coil Handling Equipment
Specification Value
Uncoiler Type Manual or hydraulic decoiler
Coil Capacity 3–5 tons
Coil Inner Diameter 450–550 mm
Coil Outer Diameter Up to 1200 mm
Expansion Type Manual or hydraulic expansion
Optional Equipment
Equipment Description
Automatic Stacker Cabinet frame stacking system
Servo Feeder Precision feeding system
Coil Car Automatic coil loading system
Multi Profile Tooling System for producing multiple cabinet frame sizes
Remote PLC Monitoring Remote diagnostics and monitoring
Automation improves production efficiency and reduces manual labor.
Installation Requirements
Requirement Typical
Foundation Reinforced concrete floor
Floor Load Capacity 9–14 tons
Electrical Connection Three phase industrial power supply
Air Supply Optional
Installation Time 2–3 days
Maintenance Requirements
Component Maintenance Interval
Gearbox Oil 6 months
Bearings 6 months
Hydraulic Oil 12 months
Punch Tool Inspection Monthly
Roll Tooling Inspection Monthly
Regular maintenance ensures reliable cabinet frame production.
Production Capacity Example
Production Speed Output
15 m/min 900 m/hour
25 m/min 1500 m/hour
35 m/min 2100 m/hour
Production capacity depends on punching patterns and profile complexity.
Cabinet Frame Profile Information
Specification Value
Profile Type Cabinet frame structural channel
Typical Width 40–120 mm
Material Thickness 0.6–2.0 mm
Typical Length 300–2500 mm
Cabinet frame profiles are used to manufacture filing cabinets, tool cabinets, storage units and office furniture.
Machine Standards
Standard Description
CE Certification European machinery safety standards
ISO 9001 Manufacturing quality management
Industrial Machinery Standards Global machinery safety compliance
Steel cabinet frame roll forming machines are widely used in furniture and storage equipment manufacturing.
Shipping Information
Specification Value
Container Size 40 ft container
Shipping Weight 11–15 tons
Packaging Industrial export packing
Typical Machine Price Range
Machine Type Price Range
Basic Line $70,000 – $110,000
Automatic Punching Line $110,000 – $150,000
High Speed Automated Line $150,000+
Pricing depends on punching systems, automation level and profile complexity.
Applications
Industry Use
Office Furniture Manufacturing Metal filing cabinets
Industrial Storage Systems Tool cabinets and equipment storage
Commercial Furniture Office and storage cabinets
Workshop Equipment Manufacturing Industrial cabinet frames
Steel cabinet frame roll forming machines produce structural steel profiles used worldwide in the manufacturing of cabinets, storage furniture and industrial storage systems.