Structural Deck Roll Forming Machine Data Sheet | Technical Specifications
Structural Deck Roll Forming Machine Technical Data Sheet
Machine Overview
Parameter Specification
Machine Name Structural Deck Roll Forming Machine
Profile Produced Structural Steel Deck Panels
Machine Type Single profile or multi-profile structural deck roll forming machine
Production Application Steel floor systems, structural decking, concrete composite floor systems
Manufacturing Process Continuous cold roll forming
Production Environment Factory production line / steel building manufacturing facility
The structural deck roll forming machine produces heavy-duty steel deck panels used in structural floor and roof systems. These panels provide load-bearing strength and act as permanent formwork for reinforced concrete floors in steel frame construction.
Structural deck panels are widely used in commercial buildings, industrial facilities, parking garages, bridges, and multi-story steel structures.
Production Specifications
Specification Typical Value
Production Speed 8–22 m/min
Forming Stations 18–28 stations
Material Thickness Range 0.8–1.8 mm
Coil Width 900–1250 mm
Coil Weight Capacity 8–18 tons
Cut Length Tolerance ±1 mm
Minimum Deck Length 1000 mm
Maximum Deck Length Unlimited
Structural deck machines are designed to produce deep rib profiles capable of supporting heavy structural loads.
Material Compatibility
Material Type Supported
Galvanized Steel Yes
High Strength Structural Steel Yes
Galvalume Steel Optional
Pre-painted Steel Optional
Stainless Steel Limited
Galvanized steel is commonly used to provide corrosion resistance in structural decking systems.
Material Strength
Property Typical Range
Yield Strength G350 – G550
Tensile Strength Up to 550 MPa
Coating Types Galvanized Z275 – Z450
High-strength steel ensures structural load capacity in steel decking systems.
Machine Frame Construction
Component Specification
Frame Type Heavy duty welded structural steel frame
Frame Plate Thickness 22–32 mm
Machine Base Reinforced fabricated steel base
Frame Alignment Precision machined mounting surfaces
Machine Weight 20–40 tons
The rigid machine frame provides stability during the forming of structural decking profiles.
Roll Tooling Specifications
Specification Typical Value
Roller Material GCr15 bearing steel
Heat Treatment HRC 58–62
Roller Diameter 100–140 mm
Shaft Diameter 90–120 mm
Shaft Material 40Cr alloy steel
Surface Finish Hard chrome plating
Roll Pass Design Structural deck forming system
Forming Stages 18–28 stations
Roll tooling gradually forms the deep ribs and structural channels required for structural deck panels.
Drive System
Component Specification
Drive Type Gearbox drive system
Main Motor 22–37 kW
Drive Ratio 1:20
Transmission Heavy duty industrial gearbox
Lubrication Oil bath gearbox
The gearbox drive system provides high torque needed for forming structural steel deck profiles.
Hydraulic Cutting System
Component Specification
Cutting Type Hydraulic flying shear or hydraulic post cut
Blade Material Cr12 tool steel
Cutting Accuracy ±1 mm
Hydraulic Pressure 12–22 MPa
Hydraulic Motor 5.5–11 kW
Hydraulic cutting systems ensure precise deck panel lengths during continuous production.
Control System
Component Specification
PLC Siemens / Mitsubishi / Delta
HMI Industrial touch screen interface
Length Measurement Rotary encoder system
Control Accuracy ±1 mm
Automation Fully automatic production
Control functions include:
Automatic panel length control
Batch production programming
Production monitoring
Fault diagnostics
Emergency stop system
Electrical Specifications
Parameter Value
Voltage 380V / 415V / 480V
Frequency 50 Hz / 60 Hz
Control Voltage 24V
Electrical Cabinet IP54 industrial enclosure
Protection Overload protection and circuit breakers
Machine Layout Dimensions
Parameter Value
Machine Length 14–22 m
Machine Width 2–3 m
Machine Height 2–2.6 m
Total Production Line Length 25–40 m
Typical production line configuration:
Uncoiler → Leveling System → Embossing Unit → Roll Forming Machine → Hydraulic Cutting → Run-out Table
Coil Handling Equipment
Specification Value
Uncoiler Type Hydraulic decoiler
Coil Capacity 8–18 tons
Coil Inner Diameter 450–550 mm
Coil Outer Diameter Up to 1800 mm
Expansion Type Hydraulic expansion system
Optional Equipment
Equipment Description
Embossing System Embossing for composite concrete bonding
Automatic Stacker Automatic deck stacking system
Coil Car Automatic coil loading system
Servo Feeder Precision feeding system
Remote PLC Monitoring Remote diagnostics and monitoring
Embossing systems improve bonding between steel decking and concrete in composite floor systems.
Installation Requirements
Requirement Typical
Foundation Heavy reinforced concrete foundation
Floor Load Capacity 20–40 tons
Electrical Connection Three phase industrial power supply
Air Supply Optional
Installation Time 3–4 days
Maintenance Requirements
Component Maintenance Interval
Gearbox Oil Every 6 months
Bearings Every 6 months
Hydraulic Oil Every 12 months
Roll Tooling Inspection Monthly
Routine maintenance ensures reliable machine performance and consistent structural deck quality.
Production Capacity Example
Production Speed Output
8 m/min 480 m/hour
12 m/min 720 m/hour
22 m/min 1320 m/hour
Production capacity depends on deck profile depth and material thickness.
Structural Deck Profile Information
Specification Value
Coverage Width 600–1000 mm
Rib Height 50–100 mm
Rib Spacing 150–300 mm
Material Thickness 0.8–1.8 mm
Structural deck panels provide load-bearing support for concrete floor systems in steel frame construction.
Machine Standards
Standard Description
CE Certification European machinery safety standards
ISO 9001 Manufacturing quality management
Electrical Compliance Industrial electrical safety standards
Shipping Information
Specification Value
Container Size 40 ft container or multiple containers
Shipping Weight 22–40 tons
Packaging Industrial export packing
Typical Machine Price Range
Machine Type Price Range
Basic Line $150,000 – $220,000
Automatic Structural Line $220,000 – $300,000
Heavy Duty High Speed Line $320,000+
Pricing depends on automation level, deck profile depth, and structural forming capacity.
Applications
Industry Use
Commercial Construction Composite concrete floor systems
High-Rise Buildings Structural steel floor decking
Industrial Buildings Mezzanine floors and platforms
Infrastructure Projects Structural concrete slab systems
Structural deck roll forming machines are widely used in steel construction because they produce heavy-duty decking panels that provide structural support for reinforced concrete floor systems.