Used Mitsubishi SD25 CNC Gear Shaper | A.K. Machine Traders, Navi Mumbai, India

This used Mitsubishi SD25 CNC gear shaper is available from A.K. Machine Traders in Navi Mumbai, India. A gear shaper cuts external and internal gear teeth using a reciprocating cutter.

It takes external gears up to Ø250 mm and internal gears up to Ø120 mm plus the cutter diameter, with a maximum workpiece module of 6 and face width of 60 mm. The main spindle runs at 300–1,500 strokes/min and is driven by an 11 kW motor.

Key Features

CNC-controlled gear shaping
Radial feed with a rapid feed rate of 10,000 mm/min
Selectable number of cuts: 1, 2, 3 or 4

Technical Specifications

Model: Mitsubishi SD25
Maximum external gear diameter: Ø250 mm
Maximum internal gear diameter: Ø120 mm plus cutter diameter, up to Ø250 mm maximum
Maximum workpiece module: 6 (minimum diametral pitch 4.2333)
Maximum workpiece face width: 60 mm
Maximum cutter stroke: 70 mm
Maximum main spindle travel: 85 mm
Main spindle stroke speed: 300–1,500 strokes/min
Radial feed: -60 to 270 mm
Radial feed rate: 0.001–0.1 mm/stroke
Radial rapid feed rate: 10,000 mm/min
Number of cuts: 1, 2, 3 or 4
Circumferential feed rate: 3–5,300 mm/min
Cutter spindle diameter: Ø90 mm
Table diameter: Ø330 mm
Main motor output: 11 kW (15 HP), continuous rating
Electrics: 3-phase, 60 Hz, 220 V
Approximate dimensions: 86 in front to back x 96 in left to right x 105 in height
Approximate weight: 14,500 lb

Applications

External spur and helical gears
Internal gears and ring gears
Gearbox and transmission components
General engineering gear production

Commercial Details

Make: Mitsubishi
Model: SD25
Condition: Used
Location: Navi Mumbai, Maharashtra, India
Seller: A.K. Machine Traders

Frequently Asked Questions

What size gears can it cut? It cuts external gears up to Ø250 mm and internal gears up to Ø120 mm plus the cutter diameter, with a maximum face width of 60 mm.
What is the main motor power? The main motor is rated at 11 kW (15 HP) continuous.
What electrical supply does it need? It is listed as 3-phase, 60 Hz, 220 V.
What should I ask when enquiring? Ask for photos or video of the machine under power, whether an inspection is possible, which cutters, fixtures and accessories are included, the condition of the CNC control and electrics, and loading and shipping arrangements.

عرض سعر سريع