60/1000 Industrial Panel Dimensions, Rib Spacing, Gauge Range, and Span Tables
60/1000 Industrial Panel Dimensions, Rib Spacing and Span Tables
The 60/1000 Industrial Panel is a deep structural trapezoidal metal roofing and wall cladding profile designed for long-span industrial buildings. The large rib height provides exceptional structural strength, allowing the panel to handle high loads and span greater distances between supports.
The designation 60/1000 refers to the profile geometry:
• 60 mm rib height
• 1000 mm effective coverage width
Because of its deep rib geometry, the 60/1000 panel is often used in large industrial roofing structures where long spans and heavy loads are required.
60/1000 industrial panels are commonly used in:
• factories
• logistics warehouses
• aircraft hangars
• power plants
• large agricultural buildings
• industrial production facilities
These panels are manufactured using heavy-duty roll forming machines that shape steel coil into trapezoidal ribs through a series of forming stations. Roll forming allows panels to be produced in long custom lengths, minimizing roof joints and improving structural performance.
This guide provides a detailed technical overview of 60/1000 industrial panel dimensions, rib spacing, steel gauges, coil width requirements, and span tables used by engineers, contractors, manufacturers, and roll forming machine buyers.
What is a 60/1000 Industrial Panel
A 60/1000 industrial panel is a trapezoidal metal roofing sheet with very deep structural ribs designed for high load capacity and long span roofing systems.
Compared with standard roofing profiles such as 32/1000 or 40/1000, the 60 mm rib height provides:
• significantly higher structural rigidity
• improved load distribution
• longer span capability
• better resistance to wind uplift
• improved drainage performance
Because of these characteristics, the profile is widely used in structural industrial roofing systems.
Standard 60/1000 Industrial Panel Dimensions
60/1000 industrial panels contain several trapezoidal ribs distributed across the panel width.
Typical dimensions include:
Specification
Typical Measurement
Coverage Width
1000 mm
Overall Width
1080 – 1100 mm
Rib Height
60 mm
Rib Pitch
200 – 250 mm
Number of Ribs
4 – 5
Panel Length
Custom roll formed
Coverage width refers to the effective installed panel width.
Rib Layout and Profile Geometry
The deep trapezoidal rib design provides strong structural reinforcement across the sheet.
Typical rib layout characteristics include:
• deep trapezoidal ribs
• wide flat pan sections between ribs
• anti-capillary side lap design
Typical rib dimensions include:
Feature
Measurement
Rib height
60 mm
Rib pitch
200 – 250 mm
Rib top width
40 – 60 mm
Rib base width
150 – 200 mm
These ribs significantly increase the panel’s structural stiffness.
60/1000 Industrial Panel Cross Section Dimensions
The cross section of the sheet contains trapezoidal ribs separated by flat pans.
Typical cross section characteristics include:
Rib height
60 mm
Panel coverage width
1000 mm
Number of ribs
4 – 5 ribs
Side lap
1 rib overlap
The side lap ensures water-tight installation.
Steel Gauge Range for 60/1000 Industrial Panels
60/1000 industrial panels are typically manufactured using medium to heavy steel gauges.
Typical gauges include:
Gauge
Thickness
Typical Application
24 gauge
0.0239 in
Industrial roofing
22 gauge
0.0299 in
Heavy industrial roofs
20 gauge
0.0359 in
Structural roofing systems
18 gauge
0.0478 in
Long span industrial roofs
Thicker gauges provide higher load capacity.
60/1000 Industrial Panel Span Tables
Span tables determine the maximum distance the panel can span between structural supports.
Span capability depends on:
• steel thickness
• rib height
• rib spacing
• wind loads
• snow loads
Typical span ranges include:
Gauge
Roof Span
24 gauge
6 – 8 ft
22 gauge
8 – 11 ft
20 gauge
11 – 15 ft
18 gauge
15 – 20 ft
Engineering calculations must always be performed for specific building designs.
Coil Width Requirements for 60/1000 Industrial Panels
Steel coil must be slit to the correct width before entering the roll forming machine.
Typical coil widths include:
Panel Coverage
Coil Width
1000 mm panel
1200 – 1250 mm coil
Additional material is required to form the trapezoidal ribs during roll forming.
Correct coil width ensures accurate panel coverage after forming.
Materials Used for 60/1000 Industrial Panels
60/1000 industrial panels can be manufactured using several metal materials depending on environmental conditions.
Common materials include:
Galvanized steel
Galvalume steel
Aluminum
Pre-painted steel
Galvalume steel is widely used due to its corrosion resistance and long service life.
Industries Using 60/1000 Industrial Panels
60/1000 industrial panels are widely used in large structural roofing projects.
Typical applications include:
Industrial factories
Logistics warehouses
Distribution centers
Aircraft hangars
Manufacturing plants
Power generation facilities
These panels are ideal for large-span steel building structures.
Roll Forming Machines Used to Produce 60/1000 Industrial Panels
60/1000 industrial panels are produced using heavy-duty roll forming machines designed for structural roofing profiles.
Typical machine specifications include:
Number of forming stations
20 – 28 stations
Roller material
Hardened tool steel
Machine speed
10 – 20 meters per minute
Drive system
Gearbox drive
Cutting system
Hydraulic shear or flying shear
Control system
PLC automatic length control
These machines are designed for high-strength steel forming.
Installation Considerations
Proper installation ensures long-term performance of industrial roofing systems.
Important installation factors include:
Correct panel overlap
Fastener placement on rib peaks
Roof slope requirements
Sealing of side laps
Panels are typically overlapped by one rib.
Engineering Load Considerations
When designing roofing systems using 60/1000 industrial panels, engineers must consider:
Wind uplift loads
Snow loads
Thermal expansion
Structural support spacing
These panels are typically installed over steel purlins or structural beams.
Common Manufacturing Problems
Manufacturing issues may occur if roll forming machines are not properly adjusted.
Common problems include:
Incorrect rib height
Uneven rib spacing
Panel distortion
Side lap misalignment
These issues can usually be corrected by adjusting roll tooling alignment.
Frequently Asked Questions
What does 60/1000 industrial panel mean?
The designation refers to 60 mm rib height and 1000 mm effective coverage width.
What gauges are used for 60/1000 industrial panels?
Typical gauges include 24, 22, 20, and 18 gauge steel.
Where are 60/1000 industrial panels used?
They are commonly used for large industrial buildings, warehouses, aircraft hangars, and structural roofing systems.
Are 60/1000 industrial panels strong?
Yes. The deep rib geometry provides excellent structural rigidity and allows very long roof spans.
What coil width is required for 60/1000 panels?
Typical coil widths range between 1200 mm and 1250 mm depending on panel design.
Conclusion
60/1000 industrial panels are a heavy structural trapezoidal roofing and cladding profile designed for large-span industrial buildings. The deep rib design provides exceptional structural strength, long span capability, and reliable performance in demanding construction environments.
Understanding 60/1000 industrial panel dimensions, rib spacing, steel gauges, coil width requirements, and span capabilities is essential for engineers, contractors, and manufacturers working with industrial roofing systems.
Roll forming machines designed for 60/1000 industrial panel production allow manufacturers to efficiently produce durable roofing sheets used in large industrial structures.