Dreis & Krump Machine Pricing: Press Brake, Shear and Fabrication Equipment Costs
Dreis & Krump – Pricing & Cost Breakdown
Introduction
Dreis & Krump machines fall into the mid-range pricing category for metal fabrication equipment, with costs varying significantly depending on
Machine type (press brake, shear, hand brake)
Size and tonnage
Condition (new vs used)
Level of automation
Unlike portable roll forming machines, these are heavy-duty fabrication machines, so pricing is closely tied to capacity and build quality.
Typical Machine Price Ranges
Dreis & Krump pricing is best understood by machine category.
General ranges
Manual and small fabrication machines
$1,500 – $10,000
Used press brakes and bending machines
$5,000 – $35,000+
Larger hydraulic or industrial machines
$30,000 – $100,000+ (depending on size and spec)
Because many Dreis & Krump machines are long-lasting, the used market plays a major role in pricing.
Used Machine Pricing
The majority of Dreis & Krump machines are traded in the used market due to their durability.
Typical used price ranges
Press brakes
$1,450 – $32,500 average listings
Example listings
Large mechanical press brake (225 ton)
Around $9,900
Finger brake (light fabrication)
Around $6,500
Mid-size press brakes (50–90 ton)
Typically $10,000 – $40,000 depending on condition
These prices show how wide the range can be depending on
Capacity
Age
Condition
New Machine Pricing
New Dreis & Krump machines are less commonly listed publicly, but based on market positioning and comparable fabrication equipment:
Estimated new price ranges
Manual hand brakes
$3,000 – $15,000
Power leaf brakes and shears
$15,000 – $60,000
Hydraulic press brakes
$40,000 – $120,000+ depending on tonnage and automation
Modern hydraulic machines (45–300 ton range) are significantly more expensive due to
Increased capacity
Hydraulic systems
Optional CNC controls
Price by Machine Type
Hand Brakes and Small Equipment
$1,500 – $10,000
Used and entry-level
Simple manual machines
Sheet Metal Shears
$10,000 – $50,000
Depends on
Cutting capacity
Hydraulic vs mechanical
Press Brakes
$10,000 – $100,000+
Depends heavily on
Tonnage (45–300 ton range)
Length and capacity
Automation level
Heavy Industrial Machines
$50,000 – $150,000+
Large hydraulic systems
High tonnage machines
Industrial applications
New vs Used Comparison
New machines
Higher cost
Modern features
Warranty and support
Used machines
Much lower cost
Proven durability
Limited or no warranty
Because Dreis & Krump machines are built to last decades, many buyers choose used equipment as a cost-effective option.
Hidden Costs to Consider
Beyond the machine price, buyers should consider additional costs.
Initial costs
Tooling (press brake dies, punches)
Installation and rigging
Transport and shipping
Operational costs
Maintenance and servicing
Replacement parts
Operator training
Facility requirements
Power supply (3-phase for larger machines)
Floor space and foundations
These can add
$5,000 – $25,000+ depending on setup
Total Investment Example
Typical mid-size fabrication setup
Used press brake
$20,000
Tooling
$5,000 – $15,000
Transport and installation
$3,000 – $10,000
Total investment
$30,000 – $50,000+
Cost vs Value
Dreis & Krump machines are known for
Long service life
Low maintenance requirements
Strong resale value
Many machines remain operational for
20–40+ years
This makes them
A low-risk investment
Ideal for long-term use
Depreciation and Resale Value
Dreis & Krump machines depreciate slowly due to their durability.
Typical trends
After 10–20 years
Still retain significant value
After 20+ years
Still actively traded in used market
This is uncommon compared to many modern machines.
ROI Considerations
Return on investment depends on
Production volume
Type of fabrication work
Machine utilization
Typical ROI drivers
In-house fabrication instead of outsourcing
Increased production capability
Reduced labor time
For fabrication shops, ROI is often achieved within
12–24 months depending on workload
Machine Matcher Insight
From a Machine Matcher perspective, Dreis & Krump pricing reflects
Durable, long-life machines
Strong used market value
Lower cost entry compared to CNC systems
Best suited for
Fabrication shops
Workshops needing bending and cutting
Businesses wanting reliable, long-term equipment
Key considerations
Limited automation vs modern CNC machines
Higher cost for large hydraulic systems
Not suitable for continuous production
Conclusion
Dreis & Krump machines range from entry-level manual equipment under $10,000 to large industrial systems exceeding $100,000, with a strong emphasis on value in the used market.
Their durability and long lifespan make them a cost-effective choice for fabrication businesses, particularly those looking for reliable equipment without the high cost of modern CNC systems.