Used Roll Forming Machine Price Guide by Machine Type – Market Value & Pricing

Used Roll Forming Machine Price Guide by Machine Type

Introduction

Used roll forming machines are sold globally across many industries including metal roofing, construction, automotive manufacturing, steel framing, and structural steel fabrication. The resale price of these machines varies significantly depending on the machine type, production capacity, automation level, manufacturer reputation, tooling condition, and machine age.

Some roll forming machines are small portable units used by contractors, while others are fully automated industrial production systems capable of running high-volume manufacturing lines. Because of this wide variation in machine complexity, used roll forming machine prices can range from under $10,000 to well over $2 million.

This guide explains the typical resale prices for the most common types of roll forming machines and helps buyers understand what to expect when evaluating used equipment.

Typical Used Roll Forming Machine Prices by Machine Type

Roofing Panel Roll Forming Machines

Roof panel machines are one of the most common roll forming machines on the used equipment market. These machines produce metal roofing panels used in residential, commercial, and agricultural buildings.

Typical used price range:

$30,000 – $150,000

Machines may produce profiles such as:

• PBR panels
• R-panel roofing
• corrugated roofing panels
• standing seam roofing
• agricultural roofing panels

Portable contractor machines usually fall on the lower end of the price range, while large automated panel lines command higher prices.

Standing Seam Roll Forming Machines

Standing seam machines are widely used by roofing contractors and architectural metal fabricators. These machines produce high-end roofing systems used in commercial and architectural projects.

Typical used price range:

$40,000 – $180,000

Factors affecting price include:

• number of panel profiles
• machine portability
• seam type (snap-lock vs mechanical seam)
• automation level

Portable standing seam machines are often trailer mounted and designed for on-site production.

Trim and Flashing Roll Forming Machines

Trim machines produce metal flashing components used in roofing systems.

Typical used price range:

$10,000 – $70,000

Common products include:

• drip edge
• ridge caps
• fascia trim
• valley flashing
• rake trim

Because these machines are relatively simple compared to large roll forming lines, they are typically less expensive.

C & Z Purlin Roll Forming Machines

Purlin machines produce structural steel components used in metal building systems.

Typical used price range:

$80,000 – $450,000

These machines typically include:

• hydraulic punching systems
• automatic size adjustment
• hydraulic cutting systems
• PLC control systems

Fully automated purlin lines capable of producing multiple sizes command the highest prices.

Steel Stud and Track Roll Forming Machines

Steel stud machines produce cold-formed steel framing components used in commercial construction.

Typical used price range:

$70,000 – $300,000

These machines commonly produce:

• steel studs
• steel track
• framing components for drywall systems

Highly automated framing systems designed for modular construction can reach much higher values.

Metal Deck Roll Forming Machines

Metal deck machines produce structural decking used in commercial construction.

Typical used price range:

$150,000 – $700,000

Common deck profiles include:

• roof deck
• floor deck
• composite deck
• structural deck

These machines are typically larger and more complex, which explains their higher resale value.

Guardrail Roll Forming Machines

Guardrail roll forming machines are used to produce highway safety barrier systems.

Typical used price range:

$200,000 – $800,000

These machines typically include:

• heavy-duty forming stations
• punching systems
• hydraulic cutting systems
• automated stacking systems

Because these machines are designed for thick steel profiles, they require heavier construction.

Solar Mounting Roll Forming Machines

Solar mounting machines produce structural components used in solar panel installation systems.

Typical used price range:

$120,000 – $500,000

Common products include:

• solar mounting rails
• solar support brackets
• photovoltaic support systems

The rapid growth of the renewable energy industry has increased demand for these machines.

Shelf Panel Roll Forming Machines

Shelf panel machines produce steel shelving components used in warehouse storage systems.

Typical used price range:

$60,000 – $250,000

Common applications include:

• warehouse shelving
• retail shelving systems
• storage rack components

These machines are commonly used in logistics and warehouse industries.

Summary of Typical Used Machine Prices

Machine Type

Typical Used Price

Roofing panel machine

$30,000 – $150,000

Standing seam machine

$40,000 – $180,000

Trim / flashing machine

$10,000 – $70,000

C & Z purlin machine

$80,000 – $450,000

Steel stud framing machine

$70,000 – $300,000

Metal deck machine

$150,000 – $700,000

Guardrail machine

$200,000 – $800,000

Solar mounting machine

$120,000 – $500,000

Shelf panel machine

$60,000 – $250,000

These ranges represent typical resale values but actual prices depend heavily on machine configuration and condition.

Factors That Affect Used Roll Forming Machine Prices

Several key factors influence machine resale value.

Manufacturer Reputation

Machines built by well-known manufacturers often retain higher resale value.

Examples include:

• Bradbury
• Samco
• Formtek
• ASC Machine Tools
• Yoder
• Tishken

Machines from established manufacturers often last longer and maintain strong demand.

Machine Age

Machine age affects resale value.

Typical depreciation curve:

Age

Typical Value

New

100%

5 years

80–90%

10 years

65–75%

15 years

55–65%

20+ years

40–60%

Well-maintained machines can retain value for decades.

Tooling Condition

Roll tooling condition is critical.

Buyers typically inspect:

• roller wear
• roller alignment
• roller surface condition
• profile accuracy

Tooling replacement can cost tens of thousands of dollars.

Automation Level

Automation systems can increase machine value.

Examples include:

• servo punching
• flying shear cutting
• automated stacking
• PLC control systems

Machines with advanced automation typically command higher resale prices.

How to Estimate Machine Value

To estimate the value of a used roll forming machine, buyers usually evaluate:

1. machine manufacturer
2. machine age
3. number of roll stations
4. tooling condition
5. production speed
6. automation level
7. spare parts availability
8. demand for the produced profile

A professional machine inspection is often required to determine accurate market value.

Machine Matcher Valuation Service

Machine Matcher provides professional roll forming machine valuation and appraisal services for buyers, sellers, and manufacturing companies worldwide.

Our services include:

• roll forming machine appraisal reports
• used machinery inspections
• manufacturer price comparisons
• resale value analysis
• equipment valuation for financing and insurance

With extensive expertise in the roll forming machinery market, Machine Matcher helps determine accurate equipment values based on real market demand and machine condition.