Single Head Pipe End Facing and Beveling Machine for Welded Pipe | Huaye, Taiyuan, China

Single Head Pipe End Facing and Beveling Machine

Huaye (Taiyuan Huaye Heavy Industry): Taiyuan, Shanxi, China

Low-investment single-head machine that chamfers and bevels the ends of welded pipe of various lengths, processing one end at a time, for small and medium producers and medium to low output.

The Single Head Pipe End Facing and Beveling Machine chamfers and bevels the ends of welded pipe. Unlike a double-head machine that works on both ends at once, it has one head, and can process pipes of any length. After one end has been done, the pipe is turned through 180° and the other end is processed.

Because it has only one head, the investment is low. Huaye recommends it for small and medium-sized enterprises, and for production with medium to low output.

It is one of six end facing and beveling layouts Huaye builds, alongside the spiral pipe, double-head double-base, double-head single-base, staggered design, and ERW versions. Huaye says it has designed and built hundreds of pipe beveling machines, from simple units to highly configured ones.

Why Choose a Single-Head Machine?

Double-head machines cost more and need the pipe length to be set for each run. A single-head machine avoids that, and is a practical way to add end finishing without a large investment.

• Lower cost. Only one head, so a smaller investment than a double-head machine.
• Any pipe length. The single head can process pipe of various lengths without resetting the head spacing.
• Suited to smaller producers. Recommended by Huaye for SMEs and medium to low output.
• Choice within the range. Huaye also offers double-head and staggered designs when output grows.

Machine Specifications

⚠ Not yet available. The model and specification table on the page is an image. To complete this section, I need the following for each model:

• Pipe diameter and wall thickness range
• Bevel angle range and root face
• Main motor power and spindle speed
• Machine length, weight, and power supply
• Working speed or cycle time

Operation: single head; pipe rotated 180° to process the second end
Condition Available: New

Key Features

• Single head for chamfering and beveling pipe ends
• Handles pipe of various lengths
• Low investment
• Pipe is turned 180° to process the second end
• Customised production available

Applications

• End facing and beveling of welded pipe
• Small and medium pipe mills and pipe finishing shops
• Medium to low volume production

Who This Machine Is For

• Small and medium-sized welded pipe manufacturers
• Pipe producers with medium to low output
• Mills adding an end finishing station on a budget

Frequently Asked Questions

What does this machine do?
It chamfers and bevels the end of a welded pipe. The pipe is then turned 180° so the other end can be processed.

How is it different from a double-head machine?
A double-head machine works both ends at once. A single-head machine works one end at a time, so it costs less and handles any pipe length, but takes longer per pipe.

Who is it suited to?
Small and medium-sized enterprises, and production with medium to low capacity.

What sizes can it handle?
The page doesn't give the range as text. Please contact the supplier with your pipe diameter and wall thickness.

What support is included?
Design, manufacturing, assembly, transportation, installation, commissioning, training, and after-sales support.

Is financing or staged payment available?
Yes. A deposit secures your order and begins production, with the remaining balance due only once your machine has been built, inspected, and is ready to ship.

Should I buy new or used?
This machine is available new, built to order.