Spiral Pipe End Facing and Beveling Machine (Φ50-Φ4000mm) | Huaye, Taiyuan, China

Spiral Pipe End Facing and Beveling Machine

Huaye (Taiyuan Huaye Heavy Industry): Taiyuan, Shanxi, China

End facing and beveling machines for spiral welded pipe, in models covering pipe from Φ50 to Φ4,000mm, that flatten and chamfer the pipe end in a single operation.

The Spiral Pipe End Facing and Beveling Machine flattens (faces) and chamfers (bevels) the ends of spiral welded pipe. It is a finishing machine that comes after the pipe mill, preparing pipe ends so they can be welded together on site.

Huaye's beveling machines cover pipe diameters from Φ50mm to Φ4,000mm across the range. The design does the facing and the chamfering at the same time, using a contoured chamfering knife, which Huaye says gives a uniform, neat chamfer. It describes this as one of its leading products, and says it has designed and built hundreds of these machines, from simple units to high-end, highly configured ones.

Huaye also makes double-head double-base, single-head, double-head single-base, staggered-design, and ERW versions of the machine, so you can choose the layout that suits your production line.

Why Choose a Dedicated End Facing and Beveling Machine?

Pipe ends from a spiral mill are rough cut and not always square. Machining them gives a square face and a controlled bevel angle, which is needed for good welds and for meeting pipe standards.

• Facing and beveling in one pass. Both operations happen at the same time.
• Uniform bevel. A contoured chamfering knife cuts a consistent profile.
• Very wide size range. From Φ50mm up to Φ4,000mm, in different models.
• Choice of layouts. Single-head, double-head, and staggered designs.
• Complete support. Design through installation, commissioning, training, and after-sales.

Machine Specifications

⚠ Not yet available. The model and specification table on the page is an image. Only the overall range is stated in text:

• Pipe diameter range (across models): Φ50mm to Φ4,000mm
• Operation: simultaneous end facing and chamfering
• Tooling: contoured chamfering knife

To complete this section, I need the following for each model:

• Pipe diameter and wall thickness range
• Bevel angle range and root face
• Main motor power and spindle speed
• Machine length, weight, and power supply
• Working speed or cycle time

Available layouts: single-head, double-head double-base, double-head single-base, staggered design, and ERW versions
Condition Available: New

Key Features

• Simultaneous end facing and chamfering
• Contoured chamfering knife for a uniform chamfer
• Models for pipe from Φ50mm to Φ4,000mm
• Multiple layouts, from simple to highly configured
• Customised production available
• Spare parts supplied

Applications

• Preparing the ends of spiral welded pipe for welding
• Pipe finishing lines for spiral pipe mills
• Pipe manufacturing for pipelines, piling, and structural use

Who This Machine Is For

• Spiral welded pipe manufacturers
• Pipe mills adding or upgrading an end finishing station
• Producers of large-diameter pipe

Frequently Asked Questions

What does this machine do?
It flattens and chamfers the ends of spiral welded pipe at the same time.

What pipe sizes can it handle?
Huaye's models cover pipe from Φ50mm to Φ4,000mm.

What bevel does it cut?
A contoured chamfering knife cuts a uniform chamfer. The specific bevel angles depend on the model and tooling.

What layouts are available?
Single-head, double-head double-base, double-head single-base, staggered design, and an ERW version.

How is the machine shipped?
Huaye designs the equipment in modules to fit standard containers where possible, and uses frame containers, open-top containers, or bulk carriers for oversize parts.

What support is included?
Design, manufacturing, assembly, transportation, installation, commissioning, training, and after-sales support.

Is financing or staged payment available?
Yes. A deposit secures your order and begins production, with the remaining balance due only once your machine has been built, inspected, and is ready to ship.

Should I buy new or used?
This machine is available new, built to order.