Automatic Layer Rewinder ZDHP-W41S | Yiming, Dongguan, China

Yiming's Automatic Layer Rewinder ZDHP-W41S collects stamped terminal strip onto plates as it leaves a high-speed press. It takes one strip at a time and winds it in layers, ready for handling and shipment.

It changes plates automatically, so the press does not have to stop when a plate fills. Three automatic changes are possible without an operator, and the earlier plates can be swapped by hand while the machine keeps running.

Key Features

• Horizontal receiving structure collects product neatly without touching the terminal heads
• Automatic cut-off when a plate is full, with automatic feeding onto the next empty plate
• Three automatic plate changes without manual intervention, giving continuous press production
• Takes samples and collects tailings during the cycle
• Frequency conversion with photoelectric sensing; stops if the interleaving paper runs out or breaks
• Touchscreen-style man-machine interface for simple operation
• Winding direction adjustable clockwise or counterclockwise, with plate change by lifting and lowering

Technical Specifications

• Model: ZDHP-W41S
• Power supply: AC 220 V
• Strips collected: 1 strip
• Number of plates: 4
• Load per plate: ≤ 10 kg
• Strip thickness: 0.1–0.3 mm
• Strip width: 10–20 mm
• Winding speed: 10 m/min
• Plate outer diameter: 800 mm / 25 mm
• Paper plate outer diameter: 500 mm / 20 mm
• Sample length: 10–100 mm, adjustable
• CCD: No
• Machine size: 1,650 + 500 mm length × 1,400 mm width
• Weight: 600 kg

Applications

• Collecting stamped precision terminals from high-speed presses
• Continuous, unattended terminal strip production
• Electronic and electrical connector component manufacturing

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• How many plates does it handle? It has four plates and switches automatically between them three times, so the press keeps running.
• What strip sizes can it wind? It winds one strip at a time, 0.1–0.3 mm thick and 10–20 mm wide, at 10 m/min.
• Can I change full plates while it runs? Yes, once the fourth plate is being collected the first three can be replaced by hand without stopping.
• What should I send for a quotation? Send the strip width and thickness, the terminal type, your press output speed, the plate sizes you use and your power supply.