Coil CNC Feeder NCFP-200 to NCFP-500 | Yiming, Dongguan, China

Yiming's Coil CNC Feeder NCFP-200 to NCFP-500 feeds coil strip into a high-speed precision press for blanking discs and other stamped parts. It is offered in four models, taking maximum material widths of 200, 300, 400 and 500 mm.

What sets it apart is a servo-driven side-to-side shifting frame. This moves the strip sideways between strokes so that discs can be blanked in staggered rows, which makes better use of the material. It is designed to sit in a stamping line between an uncoiler and a precision press, followed by an automatic rewinder.

Key Features

• Servo-driven left and right moving frame shifts the strip sideways to position the blanked discs
• Multiple shifts can be set to suit the blanking diameter so that the circles cut close to each other and waste is reduced
• Where discs of different sizes are blanked, the arrangement angle is calculated automatically to save material
• A Mitsubishi PLC controls two servo motor systems, one for the feeding drum and one for the side-to-side movement
• Side movement runs on a Taiwan Shangyin precision roller screw with synchronous pulley
• Minimum distance between edges can be set within 0.5 mm during continuous stamping
• Feeding error is held within ±0.08 mm

Technical Specifications

• Models: NCFP-200, NCFP-300, NCFP-400, NCFP-500
• Maximum material width: 200 / 300 / 400 / 500 mm
• Material thickness: 0.2–3.2 mm
• Offset (left and right): 100 / 150 / 200 / 250 mm
• Feeding speed: 16 m/min
• Material line height: 80–250 mm
• Feeding error: within ±0.08 mm
• Minimum edge distance: settable within 0.5 mm
• Control: Mitsubishi PLC with two servo motor systems

Applications

• Computer components
• Digital machinery and DVD/CD mechanisms
• Electrical appliances
• Auto parts
• High-speed precision metal stamping lines

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• What press line does it work with? It is matched in a line of uncoiler, coil NC feeder, precision press and automatic rewinder.
• What material thicknesses and widths can it handle? It takes strip 0.2–3.2 mm thick, with maximum widths of 200, 300, 400 or 500 mm depending on the model.
• How accurate is the feeding? Feeding error is controlled within ±0.08 mm, and the minimum edge distance can be set within 0.5 mm.
• What should I send for a quotation? Send the part or disc drawing and blanking diameters, material type, strip width and thickness, press details and line height, and the stamping speed or output you need.