Cold Roll Forming Machine for Roof Panels and Custom Profiles | Shunmao, Hebei, China

Shunmao's Cold Roll Forming Machine for Roof Panels and Custom Profiles bends metal sheet continuously through sets of rollers to make roof panels and other profiles. Machines in this range are designed around the customer's product.

The series covers colour steel roof tile machines, keel machines, high-speed guardrail forming machines, roller shutter door machines and angle steel forming machines, including double-layer roof panel lines. A machine can be combined with shearing, stamping and levelling equipment to form a complete production line.

Key Features

• Rollers made from 45 steel, quenched and tempered, with hardness of at least 55 HRC and above 60 HRC for more demanding products
• Roller line precision within ±0.03
• Hydraulic cut-off that cuts automatically after forming
• Controllers and touch screen with electrical components from brands such as Siemens and Mitsubishi
• Chain transmission drive
• Can be built into a full line with shearing, stamping and levelling equipment
• Voltage can be customised

Technical Specifications

• Shaft material: 45# steel
• Roller material: 45# steel, quenched
• Roller hardness: At least 55 HRC (above 60 HRC for some products)
• Roller line precision: Within ±0.03
• Drive: Chain transmission
• Main motor power: 11 kW
• Voltage: 380 V, 50 Hz, 3-phase (can be customised)
• Base frame: 400H steel
• Blade and mould material: Cr12
• Cutting system: Hydraulic drive, automatic cutting after forming

Applications

• Roof panels and colour steel roof tiles
• Light steel keel profiles
• Highway guardrail profiles
• Roller shutter door profiles
• Angle steel sections

Commercial Details

• Brand: Shunmao
• Manufacturer: Hebei Shunmao Technology Co., Ltd.
• Place of origin: Hebei, China

Frequently Asked Questions

• What profiles can this machine make? The range covers roof panels (including double-layer), keel, guardrail, roller shutter door and angle steel profiles, and machines can be designed to suit the customer's product.
• How is the product cut to length? A hydraulic cut-off cuts automatically after forming, using Cr12 blades and moulds.
• What power supply does it use? The 11 kW main motor runs on 380 V, 50 Hz, 3-phase, and the voltage can be customised.
• What should I send for a quotation? Send the profile drawing, the material type and thickness, the product lengths, your output target and your local power supply. Say if you need shearing, stamping or levelling equipment added to the line.