Cyclone Dust Collector | Jinwo, Qingdao, China

Jinwo's Cyclone Dust Collector is a dry-type dust removal unit that separates dust from air or gas using centrifugal force. It has no filter bags or cartridges, so separation is purely mechanical.

It is mainly used to pre-treat gas with a high dust concentration or to capture coarse particles. It can run on its own or ahead of a baghouse or cartridge collector to form a two-stage dust removal system.

Key Features

• Dust-laden gas enters the body tangentially, spinning the dust to the wall where it drops into the bottom hopper
• Cleaned gas turns at the base of the cone and leaves through the central exhaust pipe at the top
• Dust is discharged periodically from the hopper through an ash discharge valve
• No filter elements or wearing parts, giving a simple structure with low maintenance
• Fully mechanical operation with no reliance on electrical control and no preheating
• Can be built from heat-resistant, wear-resistant and corrosion-resistant metals or ceramics
• Parallel multi-tube arrangements are possible for finer particles

Technical Specifications

• Type: Dry cyclone dust collector
• Separation method: Centrifugal force, no filter elements
• Dust removal efficiency: Over 90%
• Suitable particle size: Generally larger than 5 μm
• Parallel multi-tube efficiency at 3 μm: 80–85%
• Pressure drop: 500–2,000 Pa
• Maximum operating temperature: Up to 1,000°C (heat-resistant metal or ceramic construction)

Applications

• Pre-treatment of high-concentration dust ahead of baghouse or cartridge filters
• Primary dust removal for high-temperature or high-humidity gas
• Boiler flue gas primary treatment
• Raw material crushing, material transfer and powder conveying dust points
• Support systems for sandblasting and shot blasting machines

Commercial Details

• Brand: Jinwo
• Manufacturer: Qingdao Jinwo Machinery Manufacturing Co., Ltd.
• Place of origin: Qingdao, Shandong, China

Frequently Asked Questions

• Does it use filter bags or cartridges? No, it separates dust purely by centrifugal force, so there are no filter elements to replace.
• Can it be combined with other dust collectors? Yes, it can be used as a first stage ahead of a baghouse or cartridge dust collector to cut the dust load.
• What kind of dust is it suited to? Non-viscous, non-fibrous dust, generally particles larger than 5 μm.
• What should I send for a quotation? Send the airflow volume required, dust type and concentration, particle size, gas temperature and humidity, the industry or process it serves, and whether it will be used alone or ahead of another collector.