Discontinuous PU Sandwich Panel Machine NT-PUSP-6.5x1.5 | Novotek, Shanghai, China

Novotek's Discontinuous PU Sandwich Panel Machine NT-PUSP-6.5x1.5 produces polyurethane (PU) sandwich panels one piece at a time, rather than on a continuous line.

The system is split into three parts: a roll forming (or bending) machine, a PU press machine and a PU injection machine. Panel size is set by the mould board, and output depends on the press layout. The 6.5x1.5 / 2+2 model is one of the most popular in the range.

Key Features

• Three-part system: roll forming or bending machine, PU press and PU injection machine
• Panels are made piece by piece rather than continuously
• Panel size is set by the mould board, typically 6.5, 8.5 or 12.5 m long by 1 or 1.5 m wide
• Press layouts available as 1+1, 2+2 or multi-layer to suit capacity needs

Technical Specifications

• Model: NT-PUSP-6.5x1.5 / 2+2
• Mould board size options: 6.5 / 8.5 / 12.5 m long x 1 / 1.5 m wide
• Mould board quantity: 4 sets (2+2)
• Production cycle: 15–30 min
• Shift output: About 30 sets per 8 hours
• Mould board closing space height: 0–200 mm
• Max mould-locking force: 200,000 kgf
• Working pressure: 8–12 MPa
• Water pressure: 0.2 MPa
• Total power: About 60 kW
• Weight: About 25,000 kg
• Covered area: About 40,000 mm x 4,500 mm

Applications

• Insulated wall panels for buildings
• Insulated roof panels
• Cold room and cold storage panels
• Prefabricated and modular building envelopes

Commercial Details

• Brand: Novotek
• Manufacturer: Shanghai Novotek Machinery Co., Limited
• Place of origin: Shanghai, China

Frequently Asked Questions

• How does a discontinuous PU panel line differ from a continuous one? It is split into a roll forming machine, a PU press and a PU injection machine, and it makes panels piece by piece rather than continuously.
• What panel sizes can it make? Panel size is set by the mould board, normally 6.5, 8.5 or 12.5 m long by 1 or 1.5 m wide.
• What output can I expect? The 2+2 model with 4 mould board sets runs a 15–30 minute cycle and gives about 30 sets per 8-hour shift.
• What should I send for a quotation? Send the panel length and width, panel thickness, skin material and thickness, daily output target, and the press layout you want (1+1, 2+2 or multi-layer).