Edging Line for Slit Coil and Sheared Bar, 1–48 in Wide | American Steel Products, Toledo, USA

American Steel Products's Edging Line for Slit Coil and Sheared Bar passes strip or bar edges between sets of round dies. It removes burrs left by earlier processing or forms the edge into a chosen shape.

The line handles material from 1 in to 48 in wide and 0.040–0.625 in thick, with yield strength up to 50,000 psi and speeds up to 250 FPM. It can be set up as a stand-alone unit or as part of a higher-output line.

Key Features

• Hardened and ground alloy steel rollers carry the machined edge profile
• Several roller pairs shape the edge progressively, and heavy-gauge material can use driven rolls
• Dual grooved rolls let you change thickness by rotating the dies to the second groove
• Stand-alone layouts: sheared bar to edged bar, or slit coil to edged bar cut to length
• Coil-to-coil configuration for high production
• Optional flying shear cuts to length at very high speeds and feeds a dual stacking unit

Technical Specifications

• Strip or bar width: 1–48 in
• Material thickness: 0.040–0.625 in
• Material yield strength: Up to 50,000 psi
• Line speed: Up to 250 FPM

Applications

• Removing burrs from slit coil edges and sheared bar
• Safety edges on products such as lawn mower blades and roll formed fence posts
• Automotive drawer tracks and seat tracks
• Cosmetic edges on stainless steel tables and fixtures
• Service centres turning obsolete stock or edge cuts from slitting into saleable edged product

Commercial Details

• Brand: American Steel Products
• Manufacturer: American Steel Products Company
• Place of origin: Toledo, Ohio, USA

Frequently Asked Questions

• What does an edging line do? It presses the edges of slit material or sheared bar between round dies to remove burrs or form a set edge shape.
• What material sizes can it handle? The range runs from 1 in to 48 in wide and 0.040–0.625 in thick, in material up to 50,000 psi yield strength.
• Can it be used for high production? Yes. It can be set up coil to coil, or with a flying shear feeding a dual stacking unit, at speeds up to 250 FPM.
• What should I send for a quotation? Send the material type, yield strength, width and thickness range, the edge profile or a drawing, whether you feed coil or sheared bar, the output format (coil, cut lengths or stacked), and your target line speed.