H Beam Assembling, Welding and Straightening Line | Novotek, Shanghai, China

Novotek's H Beam Assembling, Welding and Straightening Line produces H-beams and T-beams by assembling flange and web plates, welding them and straightening the result in a single machine.

It combines the work of a separate assembling machine, gantry welding machine and straightening machine. This reduces machine cost and floor space compared with running three machines, and raises production efficiency.

Key Features

• Assembling, welding and straightening combined in one integrated machine
• Flange and web plate centering system, plus a pre-centering system
• Welded-construction bottom stand carrying the centering device, main transmission roller, welding torch adjusting system and conduction device
• Chain-driven main transmission with the motor and speed reducer mounted at the side of the stand
• Driving elevating roller conveyor, driving roller conveyor and idle roller conveyor for moving the beam
• Flux recycling system, hydraulic system and electrical control system included

Technical Specifications

• Web height: 200–1,500 mm
• Web thickness: 6–14 mm
• Flange width: 200–800 mm
• Flange thickness: 6–40 mm
• Work-piece length: 6,000–12,000 mm
• Assembling and welding speed: 0.35–3 m/min
• Main machine power: 3 kW
• Roller conveyor motor power: 6 kW
• Pump station power: 4 kW
• Welding source power: 138 kW

Applications

• Fabricated H-beam production for structural steelwork
• T-beam production
• Steel building and frame fabrication

Commercial Details

• Brand: Novotek
• Manufacturer: Shanghai Novotek Machinery Co., Limited
• Place of origin: Shanghai, China

Frequently Asked Questions

• What does this machine do? It assembles flange and web plates into an H-beam, welds them and straightens the beam in one integrated line; it also makes T-beams.
• What beam sizes can it handle? Web height is 200–1,500 mm and flange width 200–800 mm, with web thickness of 6–14 mm and flange thickness of 6–40 mm.
• How fast does it run? Assembling and welding speed is 0.35–3 m/min.
• What should I send for a quotation? Send the beam dimensions (web height and thickness, flange width and thickness), the work-piece lengths, your output target, and the power supply and welding process requirements.