High Speed Double Servo Coil Feeder NCH2-260 / NCH2-400 | Yiming, Dongguan, China

Yiming's High Speed Double Servo Coil Feeder feeds metal strip into a press, and is aimed at motor lamination work. It is offered in two models, the NCH2-260 for 260 mm material width and the NCH2-400 for 400 mm.

Compared with a common gear feeder, the double servo design lets the operator set feeding pitch and angle from a touch screen, which makes die changes and adjustments simpler. A second servo motor controls the release stage to improve feeding accuracy.

Key Features

• Two servo motors, with the second dedicated to controlling the release process for better accuracy
• Touch screen input for feeding pitch, angle and similar settings
• No belt linkage to the press is needed on the double servo version
• Simpler die change and adjustment than a gear feeder
• Fully automatic operation
• A single servo motor version is also available, at a lower cost than the double servo feeder; it uses a belt connection to the press and needs manual adjustment when the die or release angle changes

Technical Specifications

• Models: NCH2-260, NCH2-400
• Material width: 260 mm (NCH2-260); 400 mm (NCH2-400)
• Material thickness: 0.2–1.5 mm
• Max. speed: 50 m/min
• Servo motors: 2 pcs

Applications

• Motor lamination stamping
• Feeding strip into presses for progressive or repeat die work
• Thin-gauge metal strip feeding

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• What strip widths and thicknesses can it feed? The NCH2-260 takes 260 mm wide material and the NCH2-400 takes 400 mm, both in thicknesses of 0.2–1.5 mm.
• How fast does it run? Both models feed at up to 50 m/min.
• How is feeding pitch set? The operator enters the feeding pitch and angle on the touch screen, so no belt linkage to the press has to be adjusted.
• What should I send for a quotation? Send the material type, strip width and thickness, required feeding pitch and speed, the press type and whether you want the double or single servo version.