High Speed Gear Change Feeder FGCF-150F to FGCF-300F | Yiming, Dongguan, China

Yiming's High Speed Gear Change Feeder feeds strip into a high-speed precision stamping press. It is a belt-type, cam-driven roll feeder in four models, FGCF-150F, FGCF-200, FGCF-250 and FGCF-300F, taking maximum material widths of 200–500 mm.

Feed length is set by changing gears rather than by adjusting the feeding thickness, so the same feeder can handle different strip thicknesses and feed distances. It is normally run in a line of uncoiler, strengthener (straightener), gear feeder and press.

Key Features

• Intermittent feeding driven by a cam
• Feed distance changed by swapping between 2–4 gears; tooth counts are specified by the customer
• Only the lower roller is driven; the upper roller is spring-loaded
• Pneumatic clamp release, with a manual air valve switch to open the rollers when threading material
• Upper and lower rollers are hard chromium plated
• Eccentric cam release with the angle adjustable from 0° to 180°
• Lubrication: oil-groove type for the cam in the divider, oil-immersed for the other gear parts
• Material lubrication device included

Technical Specifications

• Models: FGCF-150F, FGCF-200, FGCF-250, FGCF-300F
• Maximum material width: 200 mm (FGCF-150F), 300 mm (FGCF-200), 400 mm (FGCF-250), 500 mm (FGCF-300F)
• Material thickness: 0.2–1.0 mm
• Offset: Left and right 100 mm (FGCF-150F), 150 mm (FGCF-200), 200 mm (FGCF-250), 250 mm (FGCF-300F)
• Feeding speed: 0–50 m/min
• Feeding angle: 135–190 degrees
• Gears: 2–4, tooth counts specified by customer
• Release angle: 0°–180° adjustable

Applications

• High-speed precision metal stamping lines
• Punching of products that need accurate feed lengths
• Stamping of thin strip in varying widths and thicknesses

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• How is the feed length changed? Feed length is changed by switching between the gears (2–4 depending on specification), with no adjustment of feeding thickness needed.
• What material thickness and speed can it handle? It feeds strip 0.2–1.0 mm thick at 0–50 m/min.
• What widths are available? Maximum material width is 200 mm on the FGCF-150F, 300 mm on the FGCF-200, 400 mm on the FGCF-250 and 500 mm on the FGCF-300F.
• What should I send for a quotation? Send the material type, strip width and thickness, required feed lengths, the gear tooth counts you need, the press speed or output target, and details of the uncoiler and straightener you plan to use with it.