Mechanical Recovery Sandblasting Room | Jinwo, Qingdao, China

Jinwo's Mechanical Recovery Sandblasting Room is an enclosed blasting booth for removing rust and scale from large, heavy workpieces and preparing them for coating. It is offered in manual and automatic versions.

Spent abrasive falls to a mechanical conveyor at the bottom of the room, which carries it to a bucket elevator. A separator cleans the abrasive so it can be reused for blasting, while dust and waste are collected for treatment. The design suits heavy, large-batch and continuous work.

Key Features

• Screw conveying and bucket elevator recover, screen, clean and reuse abrasive automatically
• Mechanical recovery gives flexibility in the choice of abrasive
• Two-stage dust removal, with a stated efficiency of over 99.99%
• Air volume adjustment device keeps recovered sand out of the dust collector, reducing abrasive loss
• Fully enclosed structure for dust-free operation
• Can be fitted with fans, dust collectors and classification systems to form a complete automated line
• Non-standard customisation available

Technical Specifications

• Type: Mechanical abrasive recovery blasting room
• Operation: Manual or automatic
• Recovery system: Screw conveyor and bucket elevator
• Dust removal: Two-stage, over 99.99% efficiency

Applications

• Large steel structures and bridges
• Engineering machinery, mining machinery and special vehicles
• Shipbuilding and repair
• Petroleum and petrochemical equipment, tanks and frames
• Locomotives, heavy castings and forgings

Commercial Details

• Brand: Jinwo
• Manufacturer: Qingdao Jinwo Machinery Manufacturing Co., Ltd.
• Place of origin: Qingdao, Shandong, China

Frequently Asked Questions

• How does the abrasive recovery work? Used abrasive is carried by a bottom screw conveyor to a bucket elevator, cleaned in a separator and fed back for blasting.
• Is it manual or automatic? It is offered in both manual and automatic versions.
• What can it be used for? It handles rust removal, descaling, paint stripping, strengthening and pre-coating preparation of large, heavy workpieces.
• What should I send for a quotation? Send the size and weight of your largest workpieces, the material and surface condition, the abrasive you plan to use, your hourly or daily throughput target, manual or automatic preference, and the room dimensions you need.