New Edging and Cut-to-Length Line, 100 mm x 6 mm | Galaxie Corporation, Wayne, Michigan, USA

This new edging and cut-to-length line is available from Galaxie Corporation. It is a complete line for processing coiled strip 25–100 mm wide and 2.0–6.0 mm thick.

The line runs at 0–25 m/min and handles coils up to 2 t on a 20 inch (508 mm) coil ID. A hydraulic flying shear cuts the strip to product lengths of up to 6 m.

Key Features

• Complete line from coil car through to exit table
• Flattener and leveller for flat, straight strip
• Decamber section to remove sideways bow
• Hydraulic flying shear cuts to length while the strip is moving
• Edging section for shaping the strip edges

Technical Specifications

• Strip thickness range: 2.0–6.0 mm (0.078–0.250 in)
• Strip width range: 25–100 mm (1–4 in)
• Coil ID: 20 in
• Coil weight: 2 t
• Product length: 6 m (19.5 ft)
• Line speed: 0–25 m/min (0–82 ft/min)
• Line direction: Right to left
• Line components: Coil car, uncoiler, flattener, edging section, pinch roll stand, decamber section, leveller, hydraulic flying shear, exit table

Applications

• Edged flat bar and strip supplied cut to length
• Steel service centres preparing narrow strip
• Blanks for fabricated and stamped parts
• Narrow strip for further manufacturing

Commercial Details

• Condition: New
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What strip sizes can the line process? It handles strip 25–100 mm wide and 2.0–6.0 mm thick.
• What is the line speed? It runs at 0–25 m/min.
• What equipment is included in the line? It includes a coil car, uncoiler, flattener, edging section, pinch roll stand, decamber section, leveller, hydraulic flying shear and exit table.
• What should I ask when enquiring? Ask for photos or video of the line, the control and electrical specification, any tooling and spares included, and loading and shipping arrangements.