New Small Wave Corrugated Aluminum Coil 0.2-1mm | China

New ZHAOYANG Small Wave Corrugated Aluminum Coil for Thermal Insulation

Overview

This new ZHAOYANG coil has a small corrugation pressed across its width and is shipped as a roll. It is offered in 1050, 1060, 1100 or 3003 alloy and H14, H24 or H18 temper, from 0.2 to 1.0 mm (0.008 to 0.039 in) thick. Widths are 914 and 1000 mm. The coil can be supplied in mill finish or lined with kraft paper or Polysurlyn. The minimum order is 3 tonnes, and production takes 15 to 20 days from Jinan, China.

Applications

The main use is outer jacketing on insulated pipes, vessels and tanks. The corrugations stiffen thin sheet and let it flex around curves and take up thermal movement. The supplier also lists building cladding, decorative panels and curtain walls. The low 3-tonne minimum order suits smaller insulation contractors and stockists who want corrugated coil alongside flat jacketing.

Specifications

Manufacturer: ZHAOYANG (Jinan Zhaoyang Aluminium Industry Co., Ltd.)
Category: Small wave corrugated aluminum coil
Condition: New
Alloy: 1050, 1060, 1100, 3003
Temper: H14, H24, H18
Thickness: 0.2 to 1.0 mm (0.008 to 0.039 in)
Width: 914, 1000 mm (whether before or after corrugation is not stated)
Profile: Small wave, pressed across the width
Surface / lining: Mill finish, kraft paper or Polysurlyn
Minimum order: 3 tonnes
Production time: 15 to 20 days
Packing: Coil, plastic film wrapped, on pallet
Location: Jinan, China
Price: On request
Listing ID: 533673358

Condition and seller notes

This is new coil, produced to order in 15 to 20 days. It is shipped film-wrapped on pallets. The page gives no wave dimensions, coil weight, standards, payment terms or warranty. Buyers should confirm the corrugation profile, the barrier type and any warranty and mill certificates with the supplier before ordering.

FAQs

What size are the corrugations?
The page doesn’t give wave pitch or height. Ask the supplier for a profile drawing before ordering, especially if you need the coil to match existing jacketing.

Can I get it with a moisture barrier?
Yes. Besides plain mill finish, it is offered lined with kraft paper or with Polysurlyn on the inner face.

What is the minimum order and production time?
The minimum order is 3 tonnes, and production takes 15 to 20 days.

What thicknesses and widths are available?
Thickness runs from 0.2 to 1.0 mm, in 914 or 1000 mm widths. It isn’t stated whether those widths are measured before or after corrugating.