New Stretcher Leveler, 2000 mm x 6 mm | Galaxie Corporation, Wayne, Michigan, USA

This New stretcher leveler is available from Galaxie Corporation. It is built to flatten sheet from 1 mm to 6 mm thick, up to 2,000 mm wide and up to 6,000 mm long.

It uses push-pull and compression cylinders and runs at up to 10 m/min. The leveler is new and has never been installed.

Key Features

• Push-pull and compression cylinders
• 24V DC control voltage
• Runs on 380–480 V, 3-phase, 50–60 Hz supply

Technical Specifications

• Sheet thickness: 1–6 mm (0.039–0.250 in)
• Maximum sheet width: 2,000 mm (78 in)
• Maximum sheet length: 6,000 mm (236 in)
• Push-pull cylinder diameter: Ø400/280 mm (16/11 in)
• Compression cylinder diameter: Ø330/250 mm (13/9.8 in)
• Hydraulic pressure: 160 psi
• Maximum line speed: 10 m/min (32 ft/min)
• Control voltage: 24V DC
• Electrical supply: 380–480 V, 3-phase, 50–60 Hz

Applications

• Flattening steel and other metal sheet before cutting or fabrication
• Preparing plate and sheet for laser or plasma cutting
• Removing flatness defects from sheet in service centres and fabrication shops

Commercial Details

• Condition: New
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What sheet sizes can it handle? It takes sheet from 1 mm to 6 mm thick, up to 2,000 mm wide and up to 6,000 mm long.
• How fast does it run? Maximum line speed is 10 m/min.
• What electrical supply does it need? It is rated for 380–480 V, 3-phase, 50–60 Hz, with 24V DC control voltage.
• What should I ask when enquiring? Confirm the make and model, what accessories and documentation are included, the control and electrics for your local supply, and loading and shipping arrangements.