Q35Y Series Hydraulic Ironworker | Nantong Super, Nantong, China

Nantong Super's Q35Y Series Hydraulic Ironworker is a multi-purpose machine for cutting and punching plate, square bar, angle, round bar, channel and similar sections in a fabrication shop.

It uses an integrated hydraulic control system with Bosch Rexroth components from Germany and Parker cylinder seals. It is designed to run continuously at rated load, and it has a protective fence with a safety interlock.

Key Features

• Integrated hydraulic control system designed for reliable operation and easy maintenance
• Hydraulic system from Bosch Rexroth, Germany; cylinder seals from Parker, USA
• Rectangular monoblock blades with 4 cutting edges, in D2 high-carbon high-chrome steel
• Protective fence with safety interlock
• Movable single-hand pedal switch, with emergency stops on the machine and foot switch
• Electrical cabinet fitted with a cooling unit
• Options include Atos pump and valve, round, oval and square punch and die sets, channel and joist shear, conveyor table, linear-guide table, oil filter, reducing sleeve and Ø20 mm, Ø32 mm and Ø60 mm U-type circle tooling

Technical Specifications

• Series: Q35Y
• Machine type: Hydraulic ironworker
• Blade type: Rectangular monoblock, 4 cutting edges, D2 quality
• Optional large worktable: 500 x 1,000 mm

Applications

• Metal fabrication shops
• Cutting plate and flat sections to size
• Cutting square bar, round bar, angle and channel
• Punching holes in plate and structural sections

Commercial Details

• Brand: Nantong Super
• Manufacturer: Nantong Super Machinery Co., Ltd
• Place of origin: Nantong, Jiangsu, China

Frequently Asked Questions

• What materials can it cut and punch? It handles plate, square bar, angle, round bar, channel and similar sections.
• Which hydraulic components does it use? The hydraulic system is from Bosch Rexroth, Germany, with Parker cylinder seals from the USA.
• What options are available? Options include punch and die sets, channel and joist shears, a conveyor table, a linear-guide table, a 500 x 1,000 mm worktable, an Atos pump and valve, and U-type circle tooling.
• What should I send for a quotation? Send the materials and maximum thickness you need to cut and punch, the section types and sizes, the hole sizes and tooling you need, your power supply, and any options such as a conveyor or larger table.