Rebuilt Cut to Length Line, 2500 mm x 25 mm, 80,000 lb Coil | Galaxie Corporation, Wayne, Michigan, USA

This rebuilt cut-to-length line is available from Galaxie Corporation. It uncoils, flattens and shears heavy coil into flat sheet or plate, then stacks the cut lengths.

It handles material from 8 mm to 25 mm thick and up to 2,500 mm (98 inches) wide, with coils weighing up to 36,000 kg (80,000 lb). The page lists the line as refurbished in 2022.

Key Features

• Entry coil car for loading coils
• Double mandrel uncoiler
• Coil breaker and hold-down roll
• Peeler table and pinch rolls
• Two UBR straighteners
• Flying shear with conveyors before and after it
• Stacker for the cut lengths

Technical Specifications

• Thickness range: 8–25 mm (0.315–1 inch)
• Width: 2,500 mm (98 inches)
• Max coil weight: 36,000 kg (80,000 lb)
• Coil ID: 508–700 mm (20–30 inches)
• Max coil OD: 2,000 mm (80 inches)
• Uncoiler: Double mandrel
• Straighteners: 2 x UBR
• Shear: Flying shear

Applications

• Cutting heavy steel coil into flat plate
• Supplying plate and sheet blanks for fabrication
• Preparing flat stock for further processing in steel service centres

Commercial Details

• Year: 2022
• Condition: Rebuilt
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it process? It runs material from 8 mm to 25 mm thick, up to 2,500 mm (98 inches) wide.
• What coil sizes can it take? Coils up to 36,000 kg (80,000 lb), with an inside diameter of 508–700 mm and an outside diameter up to 2,000 mm.
• What equipment is included in the line? It includes an entry coil car, double mandrel uncoiler, coil breaker, hold-down roll, peeler table, pinch rolls, two UBR straighteners, conveyors, flying shear and stacker.
• What should I ask when enquiring? Ask for photos or video of the line running, details of the 2022 refurbishment, the make and condition of the control and electrics, what tooling and spares are included, and loading and shipping arrangements.