Scaffold Plank Roll Forming Line MGF560 | Magafi, Istanbul, Turkey

Magafi's MGF560 Scaffold Plank Roll Forming Line turns steel coil into scaffold planks (walk boards) in one automatic process. It works strip 475–560 mm wide in thicknesses of 1.30–2.00 mm.

The line combines non-slip pattern pressing, punching, edge bending and the forming of stiffening ribs in a single system. Length cutting and punching are handled by an integrated punch group.

Key Features

• Fully automatic operation from coil to finished plank
• Non-slip pattern pressing built into the line
• Punching and edge bending in the same system
• Rib formations that add rigidity to the plank
• Integrated length cutting and punching unit
• Forming tooling made from heat-treated steel at 58–60 HRC
• Custom-made roll forming bearings

Technical Specifications

• Model: MGF560
• Type: Automatic
• Strip width: 475–560 mm
• Sheet thickness: 1.30–2.00 mm
• Forming stations: 27
• Tooling material: Heat-treated C 2379 steel, 58–60 HRC
• Bearings: Custom made
• Drive type: Reducer
• Included unit: Integrated length cutting and punching (punch group)

Applications

• Scaffold planks and walk boards for construction sites
• Working platforms for scaffolding systems
• Access platforms in industrial maintenance work

Commercial Details

• Brand: Magafi
• Manufacturer: Magafi Machinery Group
• Place of origin: Istanbul, Turkey

Frequently Asked Questions

• What thickness and strip width can the MGF560 process? It processes steel strip 475–560 mm wide in thicknesses of 1.30–2.00 mm.
• Does the line include cutting and punching? Yes, it has an integrated length cutting and punching unit, and the line also presses the non-slip pattern.
• How many forming stations does it have? It has 27 forming stations driven through a reducer.
• What should I send for a quotation? Send the plank profile drawing, the material and thickness, the plank lengths, the punching and non-slip pattern requirements, and your output target.