Servo Zig Zag Feeder NCF-200A-LR to NCF-1500A-LR | Yiming, Dongguan, China

Yiming's Servo Zig Zag Feeder is a left-and-right swinging NC servo feeder that moves strip across the die as it feeds, so circular blanks can be cut in a staggered pattern with less scrap. It is offered in nine models for coil widths of 200–1,500 mm.

The operator enters the material width, the diameter of the cutting circle and the feeding step distance on the touch screen. The control system then calculates the swing and feed distances itself, so the feeder runs fully automatically.

Key Features

• Left and right swinging NC servo feeder
• Freestanding rack design
• Touch-screen entry of material width, cutting circle diameter and feed step distance
• Control system calculates the swing and feed movements automatically
• Multiple staggered rows to make the best use of the material
• Air pressure used for strip relaxation

Technical Specifications

• Models: NCF-200A-LR, NCF-300A-LR, NCF-400A-LR, NCF-500A-LR, NCF-600A-LR, NCF-800A-LR, NCF-1000A-LR, NCF-1300A-LR, NCF-1500A-LR
• Max coil width: 200–1,500 mm (by model)
• Swing range: ±100 mm (NCF-200A-LR) to ±750 mm (NCF-1500A-LR)
• Relaxation: Air pressure
• Feeding speed: 20 m/min
• Swing speed: 45 m/min
• Control: Touch screen with automatic calculation of swing and feed distances

Applications

• Blanking round discs from coil in presses
• Press feeding lines that need less scrap from circular blanks
• Stamping of round parts such as lids, washers and cookware blanks

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• What coil widths can the feeder handle? The range runs from 200 mm on the NCF-200A-LR to 1,500 mm on the NCF-1500A-LR.
• How fast does it feed and swing? All models feed at 20 m/min and swing at 45 m/min.
• How is it set up for a job? You enter the material width, cutting circle diameter and feed step distance on the touch screen, and the control calculates the movements.
• What should I send for a quotation? Send the coil width and thickness, material type, the blank diameter and layout you want, the press details, and your output target so the right model can be matched.