Side-Mounted Cartridge Dust Collector | Jinwo, Qingdao, China

Jinwo's Side-Mounted Cartridge Dust Collector is a dry-type dust removal unit that separates dust from industrial air using filter cartridges or bags. The elements lie horizontally or at an angle along the side wall of the cabinet rather than hanging vertically from the top.

Because filter elements are fitted and removed from the side, no overhead or underfloor maintenance space is needed. This suits workshops with limited ceiling height and works well for medium and low air volume dust control at grinding, blasting and welding points.

Key Features

• Filter elements installed and changed from the side, so a single person can do the work without overhead access
• Low vertical profile; can stand on the floor or be rack-mounted
• Automatic pulse-jet cleaning (side jet / forward jet) starts when system resistance reaches the set level
• Integrated sealed tube sheet with special gaskets to prevent air leakage and cross-flow
• Accepts round filter bags, pleated cartridges and other elements
• Filter media can be customised, including polyester, PPS and FMS
• Conical hopper with a discharge valve that opens regularly to remove collected dust

Technical Specifications

• Type: Dry-type side-mounted cartridge / bag dust collector
• Filtration principle: Outside filtration
• Cleaning system: Pulse-jet (side jet / forward jet)
• Gas temperature: Normal to medium-high, up to 200℃
• Dust particle size: Above 0.3μm
• Air volume duty: Medium and low
• Air inlet / outlet: Lower side inlet, upper side outlet

Applications

• Sandblasting and shot blasting booths
• Hardware grinding stations
• Furniture painting and grinding areas
• Welding stations and fume control
• Material transfer points, raw material crushing and small boiler flue gas purification

Commercial Details

• Brand: Jinwo
• Manufacturer: Qingdao Jinwo Machinery Manufacturing Co., Ltd.
• Place of origin: Qingdao, Shandong, China

Frequently Asked Questions

• How are the filter elements replaced? They are installed, removed and maintained from the side of the cabinet, so no top or bottom access is needed and one person can do it.
• How does the collector clean its filters? A pulse-jet system fires compressed air into the elements when resistance reaches the set threshold, knocking dust into the bottom hopper, where a discharge valve removes it.
• What gas temperatures and dust sizes can it handle? It treats normal and medium-high temperature gas up to 200℃ and fine dust above 0.3μm at medium and low concentrations.
• What should I send for a quotation? Send the type of dust and its concentration, gas temperature, required air volume, the source or process being served (e.g. grinding, blasting, welding), preferred filter media and available space and height.