Solar U, C and Z Profile Roll Forming Machine MGF600 | Magafi, Istanbul, Turkey

Magafi's Solar U, C and Z Profile Roll Forming Machine MGF600 produces the under-panel support profiles used in solar energy systems. It forms C, angled C, U and Z sections from strip 2.50–3.00 mm thick.

It is an automatic line with 17 forming stations and a 470 mm band width. An integrated length cutting and punching group is included, so profiles are cut and punched on the same line. The section dimensions can be varied, and the line is designed for a low scrap rate.

Key Features

• Automatic operation
• Integrated length cutting and punching group
• Forming rolls made from heat-treated C 2379 steel, 58–60 HRC
• Specially manufactured roll-form bearings
• Reducer drive
• Flexible section dimensions across C, angled C, U and Z profiles

Technical Specifications

• Model: MGF600
• Profiles: C, angled C, U and Z
• Sheet thickness: 2.50–3.00 mm
• Band width: 470 mm
• Number of stations: 17
• Type: Automatic
• Drive: Reducer
• Roll material: Heat-treated C 2379 steel, 58–60 HRC
• Bearings: Special manufacture
• Cutting and punching: Integrated length cutting and punching group

Applications

• Under-panel support profiles for solar energy systems
• Solar panel mounting structures
• C, U and Z section components for steel framing

Commercial Details

• Brand: Magafi
• Manufacturer: Magafi Machinery Group
• Place of origin: Istanbul, Turkey

Frequently Asked Questions

• Which profiles can the MGF600 make? It forms C, angled C, U and Z profiles used as under-panel supports in solar systems.
• What material thickness does it handle? It is offered for strip 2.50–3.00 mm thick with a band width of 470 mm.
• Does it cut and punch profiles? Yes, an integrated length cutting and punching group is included.
• What should I send for a quotation? Send the profile drawings with dimensions, the material type and thickness, the required cut lengths, any punching pattern, and your target output.