Terminal Stamping Winder JCHP-W42S01 | Yiming, Dongguan, China

Yiming's Terminal Stamping Winder JCHP-W42S01 collects stamped terminal strip onto plates as it leaves a high-speed press. It takes one or two strips at once and changes plates automatically, so the press does not have to stop.

It uses a horizontal receiving layout that lays the strip down neatly without touching the terminal heads, which protects the finished parts. A CCD detection system is included, and the operator works through a touchscreen-style man-machine interface.

Key Features

• Automatic plate changing: switches to an empty plate when one is full, with no need to stop the press
• Collects 1 or 2 strips at the same time
• Cuts the strip automatically when a plate is full, takes a sample and collects the tailings
• Feeds automatically after switching to the empty position, then collects onto the next plate
• Horizontal receiving structure keeps terminal heads untouched
• Frequency conversion control with photoelectric sensing, and shutdown if the interleaf paper runs out or breaks
• Winding direction adjustable clockwise or counterclockwise

Technical Specifications

• Model: JCHP-W42S01
• Power supply: AC 220 V
• Number of strips: 2
• Number of plates: 4
• Load per plate: ≤10 kg
• Coil thickness: 0.1–0.3 mm
• Coil width: 10–20 mm
• Winding speed: 10 m/min
• Plate outer diameter: 800 mm / 20 mm
• Paper plate outer diameter: 500 mm / 20 mm
• Winding direction: Clockwise and counterclockwise, adjustable
• Plate change: Plate lifting and lowering
• Sample length: 10–100 mm, adjustable
• CCD detection: Included
• Weight: 600 kg
• Dimensions: 1,650 + 50 mm long × 1,400 mm wide

Applications

• Collecting stamped precision terminals from high-speed presses
• Continuous reel-to-reel terminal production lines
• Electronic and electrical connector component manufacturing

Commercial Details

• Brand: Yiming
• Manufacturer: Dongguan Yiming Jia Equipment Co., Ltd
• Place of origin: Dongguan, Guangdong, China

Frequently Asked Questions

• How many strips can it wind at once? It collects one or two strips at the same time.
• Does the press need to stop when a plate is full? No, the machine cuts the strip, switches to an empty plate and carries on, so production continues.
• What strip sizes does it handle? Strip thickness is 0.1–0.3 mm and width is 10–20 mm, at a winding speed of 10 m/min.
• What should I send for a quotation? Send the terminal strip details (thickness, width and pitch), the number of strips, the press output speed, the plate or reel sizes and load you need, and your supply voltage.