Upright / Fence Post Roll Forming Machine | Beenew, Xiamen, China

Beenew's Upright Roll Forming Machine is set up here for steel fence posts, and can be built for racking and shelving uprights or other post profiles to the customer's drawing. Beenew also makes fence panel roll formers, so a complete set of fencing equipment can come from one supplier.

Strip is punched on a 63-tonne high-speed press with servo feeding before it reaches the 20-station roll former, then cut to length by a hydraulic post-cutter whose two-piece blade leaves no scrap.

Key Features

• 63 t high-speed punch press with servo feed, fully guarded
• 20 forming stations on an H450 frame with 25 mm side walls
• GCr15 rollers, HRC 58–62
• Two-piece Cr12MoV cutting blade, no scrap, rated for at least a million cuts
• Two exit racks

Technical Specifications

• Material: Galvanised, cold-rolled or hot-rolled sheet, G350–450 MPa
• Thickness: 1.5–3.0 mm
• Forming stations: 20
• Speed: 12 m/min
• Main motor: 15 kW
• Shafts: 45# steel, 65/80 mm
• Frame: H450, 25 mm side walls, grade 8.8 bolts
• Decoiler: 5 t, unpowered, feed width up to 1,000 mm, ID 508 ±30 mm
• Levelling: 7 shafts (3 upper, 4 lower), 2.2 kW
• Cutting: Hydraulic stop-to-cut, 11 kW, 16 MPa, about 2 s per cut
• Control: PLC
• Power supply: 380 V/50 Hz/3-phase

Applications

• Steel fence posts
• Racking and shelving uprights
• Other punched column profiles

Commercial Details

• Brand: Beenew
• Manufacturer: Xiamen Beenew Machinery Co., Ltd.
• Place of origin: Xiamen, Fujian, China

Frequently Asked Questions

• Can it make racking uprights? Yes. Beenew builds the machine for shelf posts and other columns to your drawing.
• How is the strip punched? On a 63 t high-speed press with servo feeding, before roll forming.
• Does the cutter waste material? No. The two-piece blade cuts without scrap.
• What should I send for a quotation? Your post profile drawing, hole pattern, material and thickness, lengths and output target.