Used 24" x 5,000lbs Coil to Coil Inspection Line | Galaxie Corporation, Wayne, Michigan, USA

This used coil to coil inspection line is available from Galaxie Corporation. It unwinds a coil, passes the strip over a powered inspection conveyor and rewinds it onto a recoiler.

It handles strip up to 26 inches wide and .100 inch thick, with coils up to 5,000 lb. The line includes an 11-roll straightener and a hydraulic shear rated for 1/2" capacity at up to 24" width.

Key Features

• Mandrel uncoiler with hydraulic expansion, sliding base and feed-up drive
• Wichita water-cooled brake on the uncoiler
• Kane & Rouch 11-roll straightener with single-point open/close adjustment
• BEST K500-2 hydraulic shear
• Powered roller inspection conveyor
• Recoiler with hydraulic push-off plate, separator rings and Eaton electromagnetic friction brake
• Complete with hydraulic unit, electrical panel and control pulpit

Technical Specifications

• Strip width: 26 inches
• Thickness: .100 inches
• Maximum coil weight: 5,000 lb
• Entry coil ID: 16"
• Entry maximum coil OD: 50"
• Exit coil ID: 20"
• Exit maximum coil OD: 60"
• Uncoiler mandrel face: 31"
• Straightener: Kane & Rouch 410000-508, 11 rolls
• Straightener work roll diameter: 4.5"
• Straightener roll face: 38"
• Straightener drive: 15 HP AC motor, 220V/440V dual voltage, 1160 rpm
• Shear: BEST K500-2, 1/2" capacity, 24" maximum width
• Recoiler mandrel face: 30"
• Recoiler ID: 16"
• Recoiler maximum coil OD: 60"
• Recoiler motor: 25 HP
• Recoiler gearbox: Horsburgh & Scott
• Exit turnstile: Two arm, 35" arm length, manual rotation

Applications

• Inspecting coil strip before it goes on to processing
• Rewinding strip after inspection or defect removal
• Straightening and cropping coil strip in metal service and processing work

Commercial Details

• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes does this line take? It takes coils up to 5,000 lb, with a 16" entry ID and up to 50" entry OD, and rewinds to a maximum 60" OD.
• What strip width and thickness can it run? It is listed for strip up to 26 inches wide and .100 inch thick.
• Is any extra equipment available? Three 10' sections of gravity roller conveyor are available as an extra on request.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether an inspection is possible, the control and electrical details including voltage, what tooling and accessories are included, and how loading and shipping will be handled.