Used 300,000 TPY Rebar Rolling Mill | Galaxie Corporation, Wayne, Michigan, USA

This used 300,000 TPY rebar rolling mill (2007) is available from Galaxie Corporation. It is a complete line, from reheating furnace through the mill stands, shears and cooling bed to the leveller, cold shear and bundling equipment.

The line is set up to roll 10 product types in 98 sizes, including round bar R16–R25, angle, channel, flat bar, square bar and half round bar. The reheating furnace is rated at 50 t/h, up to 65 t/h.

Key Features

• Pusher-type reheating furnace with 3 zones and 12 burners, fired on LNG with PID control
• Flying shear and dividing shear on the mill line
• Working-beam cooling bed with 3-zone water spray
• Multi-roll horizontal leveller for angle and channel
• Down-cut cold shear with shear gauge stopper
• Conveyor and counting system, stacking and turning, two binding machines and short-product treatment
• Roll shop equipment included, with roughly 380 rolls for the various products

Technical Specifications

• Year: 2007
• Annual capacity: 300,000 TPY
• Product types: 10 types, 98 sizes
• Angle: A40–A100
• Channel: C75–C150
• Flat bar: F38–F125
• Round bar: R16–R25
• Other products: Un-angle UA50, Pro-File PF-C and PF-F, rock bolt M25 and M29, SPS5 F60–F80, half round bar HR60, square bar S22
• Reheating furnace: Pusher type, 3 zones, 12 burners, LNG fuel, PID control
• Furnace capacity: 50 t/h (up to 65 t/h)
• Furnace size: 6.11 m wide x 4.3 m high x 24 m long
• Roughing mill: H-V stand 750 kW; stands 1/2 550 kW; 3/4 and 5/6 600 kW; roll Ø500 mm
• Intermediate mill: Stands 7/8 and 9/10, 600 kW, roll Ø420 mm
• Finishing mill: Stands 11–18, 650 kW, roll Ø400 mm; universal mill for channel; edge stand for flat and profile
• Flying shear: 75 kW, 65 mm square cutting capacity, 3.6 m/s cutting speed
• Dividing shear: 110 kW
• Cooling bed: Working beam, 7 m x 75 m, 90 kW rack motor, 3-zone water spray
• Cooling bed rack pitch: Move rack 500 mm, fixed rack 250/500 mm
• Leveller: Multi horizontal pitch, 150 kW AC, 2.8 m/s, roll pitch 500 mm
• Cold shear: Down cut, 55 kW AC, 400 t capacity
• Electrics: DC motor converter panel for mill motors, PLC and relay panel, power and control panel, control desk
• Other facilities: LNG gas station, water pumps, dust treatment system, lubrication and hydraulics system

Applications

• Reinforcing bar for concrete construction
• Structural angle, channel and flat bar sections
• Square and half round bar
• Rock bolts for mining and tunnelling

Commercial Details

• Year: 2007
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What products can this mill roll? It rolls 10 product types in 98 sizes, including round bar R16–R25, angle A40–A100, channel C75–C150 and flat bar F38–F125.
• What is the furnace capacity? The pusher-type reheating furnace is rated at 50 t/h, up to 65 t/h, and burns LNG.
• What is included in the line? The line covers the furnace, roughing, intermediate and finishing mills, shears, cooling bed, leveller, cold shear, product handling, roll shop equipment, electrics and supporting facilities.
• What should I ask when enquiring? Ask about photos or video of the line, inspection options, which rolls and spares are included, the state of the electrics and control panels, and how dismantling, loading and shipping will be handled.