Used Accupress 6×1600 Guillotine Shearing Machine | VIGERT, Nanjing, China

This used Accupress 6×1600 guillotine shearing machine is available from VIGERT. The 6×1600 designation indicates a 6 mm capacity and a 1,600 mm cutting length.

It is built on a fully welded, boxed-in bed table and is rated for structural quality steel with typical mechanical properties up to 80,000 tensile and 44,000 yield strength. It has a heavy-duty backgauge and a simple control console.

Key Features

• Fully welded, boxed-in bed table designed to resist torsion from the cutting force and keep blade clearance constant during the shearing cycle
• Blades chosen to minimise re-sharpening, in high carbon, high chrome or high carbon/shock-resisting grades depending on capacity
• Heavy-duty backgauge driven by precision ACME lead screws on roller bearings
• Backgauge lifts mechanically at full rearward travel so longer pieces can be sheared
• Blade clearance set manually by a hand lever on the side of the machine
• Main control console for on/off, backgauge position, stroke length and run mode
• 4 ft squaring arm on the left end of the table, with a steel rule marked in 1/16 in and 1 mm increments

Technical Specifications

• Model: Accupress 6×1600 (61356)
• Capacity: 6 mm
• Cutting length: 1,600 mm
• Rated material strength: Up to 80,000 tensile and 44,000 yield
• Backgauge drive: ACME lead screws on roller bearings
• Blade clearance adjustment: Manual hand lever
• Squaring arm: 4 ft, left end of table

Applications

• Cutting sheet and plate steel to size
• Squaring and trimming blanks for fabrication
• Preparing flat stock for press brake bending
• General metal workshop and fabrication cutting

Commercial Details

• Make: Accupress
• Model: 6×1600 (61356)
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What can this shear cut? It has a 6 mm capacity over a 1,600 mm cutting length and is rated for structural quality steel up to 80,000 tensile and 44,000 yield strength.
• How is blade clearance set? Blade clearance is adjusted manually with a hand lever on the side of the machine.
• How does the backgauge work? It runs on precision ACME lead screws on roller bearings and lifts mechanically at full rearward travel to allow longer pieces to be sheared.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, blade condition, the year, electrical and control details, whether any tooling or accessories are included, and loading and shipping arrangements.