Used Accurpress 4x3050 CNC Hydraulic Shear | VIGERT, Nanjing, China

This used Accurpress 4x3050 CNC hydraulic shear is available from VIGERT. It is an Accurshear-series guillotine shear for cutting sheet and plate to length.

The machine has a fully welded, boxed-in bed table built to resist twisting under cutting load and keep blade clearance constant through the stroke. Accurshear models are rated for structural-quality steel up to 80,000 tensile and 44,000 yield strength.

Key Features

• Fully welded boxed-in bed table with high torsion stiffness
• Heavy-duty backgauge driven by precision ACME lead screws on roller bearings
• Backgauge lifts mechanically at full rearward travel so longer pieces can be sheared
• Blades are high carbon, high chrome or high carbon/shock-resisting, depending on shear capacity
• Single control console for power, backgauge, stroke length and run mode
• 4 ft squaring arm on the left of the table, with a steel rule in 1/16 in and 1 mm increments
• Blade clearance is set manually by a side hand lever on models 62506 to 650012

Technical Specifications

• Size designation: 4x3050
• Rated material strength: Up to 80,000 tensile, 44,000 yield (structural quality steel)
• Squaring arm: 4 ft, 1/16 in and 1 mm graduations
• Backgauge drive: ACME lead screws on roller bearings
• Control: Main shear control console

Applications

• Cutting sheet and plate blanks to size
• Preparing steel stock for press brakes and fabrication
• General metal fabrication and workshop shearing

Commercial Details

• Make: Accurpress
• Model: 4x3050 CNC Hydraulic Shear
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What material can this shear cut? Accurshear models are rated for structural-quality steel with typical properties up to 80,000 tensile and 44,000 yield strength.
• How is blade clearance adjusted? On models 62506 to 650012 it is set by a hand lever on the side of the machine; the 650014 and larger models use a powered system.
• What controls does it have? The main console handles on/off, backgauge setting, stroke length and run mode.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, the exact capacity and year, the condition of the blades and backgauge, the control and electrics, what is included, and loading and shipping arrangements.