Used Accurpress 6.35×2500 Shearing Machine | VIGERT, Nanjing, China

This used Accurpress 6.35×2500 shearing machine is available from VIGERT. It cuts sheet and plate metal to size.

Its fully welded, boxed-in bed table is built to resist twisting under cutting load and to hold blade clearance steady through the stroke. The shear is rated for structural quality steel up to 80,000 tensile and 44,000 yield strength.

Key Features

• Fully welded boxed-in bed table with high torsion stiffness
• Blades chosen to suit the shear capacity (high carbon, high chrome, or high carbon/shock resisting) and developed to minimise re-sharpening
• Heavy-duty back gauge with precision ACME lead screws on roller bearings
• Back gauge lifts mechanically at full rearward travel so longer pieces can be sheared
• Blade clearance set by a hand lever on the side of the machine
• Single control console for power, back gauge, stroke length and run mode
• 4 ft squaring arm on the left of the table with a steel rule in 1/16 inch and 1 mm increments

Technical Specifications

• Model: 6.35×2500
• Rated material strength: Up to 80,000 tensile / 44,000 yield
• Back gauge drive: Precision ACME lead screws on roller bearings
• Squaring arm: 4 ft, with 1/16 inch and 1 mm scale

Applications

• Cutting sheet and plate to size in metal fabrication shops
• Squaring and trimming blanks for press brake bending
• Cutting structural quality steel plate

Commercial Details

• Make: Accurpress
• Model: 6.35×2500
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What material can this shear cut? It is rated for structural quality steel with typical properties up to 80,000 tensile and 44,000 yield strength.
• How is blade clearance adjusted? Clearance is set manually with a hand lever on the side of the machine, turned to suit the gauge of metal.
• Can it cut longer pieces? Yes, the back gauge lifts mechanically when run back to full travel, allowing longer pieces to be sheared.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, blade condition, the exact capacity of this unit, the control and electrical details, what is included, and loading and shipping arrangements.