Used Accurpress 6.35×3050 Guillotine Shearing Machine | VIGERT, Nanjing, China

This used Accurpress 6.35×3050 guillotine shearing machine is available from VIGERT. It cuts sheet and plate metal in straight lines, and the 6.35×3050 designation indicates a 6.35 mm thickness and 3,050 mm cutting length.

It is an Accurshear-series shear built on a fully welded, boxed-in bed table intended to keep blade clearance constant through the cut. The series is rated for structural quality steel with typical properties up to 80,000 tensile and 44,000 yield strength, in the imperial units the builder quotes.

Key Features

• Fully welded, boxed-in bed table with high torsional stiffness
• Backgauge driven by precision ACME lead screws on roller bearings
• Backgauge lifts mechanically at full rearward travel so longer pieces can be sheared
• Manual blade gap adjustment by a hand lever on the side of the machine on 62506 to 650012 models
• Single control console for power, backgauge position, stroke length and run mode
• 4 ft squaring arm on the left of the table, with a steel rule in 1/16 in and 1 mm increments
• High carbon, high chrome or high carbon/shock resisting blades, depending on shear capacity

Technical Specifications

• Model designation: 6.35×3050
• Series: Accurshear
• Rated steel strength: Up to 80,000 tensile and 44,000 yield (typical)
• Backgauge drive: ACME lead screws on roller bearings
• Squaring arm: 4 ft, steel rule in 1/16 in and 1 mm

Applications

• Cutting steel sheet and plate to size
• Blanking for press brake and fabrication work
• Structural quality steel cutting in general metalworking shops
• Squaring and trimming sheet metal

Commercial Details

• Make: Accurpress
• Model: 6.35×3050
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What does the 6.35×3050 designation mean? It indicates a 6.35 mm thickness and 3,050 mm cutting length.
• How is the blade gap set? On 62506 to 650012 models it is set by a hand lever on the side of the machine.
• How is the backgauge positioned? It runs on precision ACME lead screws and is set from the main control console.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, the blade condition, the electrics and control console, any included accessories, and loading and shipping arrangements.