Used Accurpress 61358 Guillotine Shear with Front Feeder | VIGERT, Nanjing, China

This used Accurpress 61358 guillotine shear with front feeder is available from VIGERT. The 4×2500 designation is the size the machine is listed under.

It is built on a fully welded, boxed-in bed table intended to keep blade clearance constant through the cut, and is rated for structural quality steel up to 80,000 tensile and 44,000 yield strength.

Key Features

• Fully welded boxed-in bed table with high torsion stiffness
• Backgauge driven by precision ACME lead screws on roller bearings
• Backgauge lifts mechanically at full rearward travel so longer pieces can be sheared
• Fixed blade clearance setting on the 6135 Series
• Single control console for power, backgauge position, stroke length and run mode
• 4 ft squaring arm on the left of the table, with a steel rule in 1/16 in and 1 mm increments
• High carbon, high chrome or high carbon/shock resisting blades depending on capacity

Technical Specifications

• Model: 61358 with front feeder
• Listed size: 4×2500
• Rated material strength: Up to 80,000 tensile, 44,000 yield (structural quality steel)
• Blade clearance: Fixed setting (6135 Series)
• Backgauge: ACME lead screws on roller bearings
• Squaring arm: 4 ft, left end of table

Applications

• Cutting steel sheet and plate to size
• Blanking for sheet metal fabrication
• Squaring and trimming plate before bending or welding
• General metal workshop cutting

Commercial Details

• Make: Accurpress
• Model: 61358
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What material is this shear rated for? It is rated for structural quality steel with typical properties up to 80,000 tensile and 44,000 yield strength.
• How is blade clearance set? The 6135 Series has a fixed blade setting, so no adjustment is needed.
• Can it cut longer pieces? Yes, the backgauge mechanically lifts at full travel to allow longer pieces to be sheared.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, blade condition, what the front feeder and backgauge include, the control and electrics, and loading and shipping arrangements.