Used ACL 6×4000 Hydraulic Guillotine Shearing Machine | VIGERT, Nanjing, China

This used ACL 6×4000 hydraulic guillotine shearing machine is available from VIGERT. It cuts sheet and plate in straight lines, and its 6×4000 designation indicates a 6 mm thickness and 4,000 mm cutting length.

The shear has a welded steel frame, a hydraulic blade drive and a parallel pressing unit with an adjustable shearing angle. An electric back gauge with a mechanical digital display sets the cut length.

Key Features

• Full steel welded frame, heat treated and vibration stress relieved
• Guillotine structure
• Two rectangular blades, each with four usable edges
• Hydraulic system with integral logic circuit and a cooling unit to hold oil temperature
• Parallel pressing cylinders with rubber pads protect the plate surface; pressure is adjustable to material and thickness
• Hydraulically adjustable shearing angle to reduce distortion on narrow strips or improve quality on thin plate
• Electric back gauge with manual fine adjustment and mechanical digital display
• Handwheel for manual blade clearance adjustment
• Timing relay sets stroke time to plate width, and a counter tracks cuts with memory
• Light beam shows the cutting line on the plate, and the support table has roller bearings for easy feeding

Technical Specifications

• Model: 6×4000
• Machine type: Hydraulic guillotine shear
• Blades: 2 rectangular blades, 4 usable edges each
• Back gauge: Electric, manual fine adjustment, mechanical digital display
• Blade clearance adjustment: Manual handwheel

Applications

• Cutting sheet and plate to size
• Blanking for sheet metal fabrication
• Preparing material ahead of press brake bending

Commercial Details

• Make: ACL
• Model: 6×4000
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What does the 6×4000 designation mean? It indicates a 6 mm thickness capacity and a 4,000 mm cutting length.
• Can the shearing angle be adjusted? Yes, it is adjusted hydraulically and electrically, with a smaller angle for narrow plate to reduce distortion.
• How is the cut length set? An electric back gauge with manual fine adjustment and a mechanical digital display sets it.
• What should I ask when enquiring? Ask for photos or video of the shear cutting under power, blade condition, the control and electrics, which accessories are included, and loading and shipping arrangements.