Used Athader Cut To Length Line, 1500 mm x 2.5 mm | Galaxie Corporation, Wayne, Michigan, USA

This used Athader cut-to-length line, made in Spain, is available from Galaxie Corporation. It uncoils, levels and shears steel coil into flat sheets.

It handles coil up to 1,500 mm wide and 2.5 mm thick, with a maximum coil weight of 25 t and a maximum sheet length of 6,000 mm. The line is a complete layout running left to right, with a 17-roll 4-Hi precision leveler and a flying shear rated at 120 cuts per minute.

Key Features

• Pit-type coil car and cone uncoiler for loading coils
• Powered hold-down roll with peeler table
• Entry and exit pinch rolls
• Motorised top and bottom back-ups on the leveler
• Flying shear with 20 kW motor
• Run-out table and exit conveyor with stacking table
• Line direction left to right

Technical Specifications

• Manufacturer: Athader (Spain)
• Maximum coil width: 1,500 mm (59 inches)
• Maximum thickness: 2.5 mm (0.098 inches)
• Maximum yield: 2,800 kg/cm²
• Maximum resistance: 4,500 kg/cm²
• Maximum coil weight: 25 t (55,000 pounds)
• Coil inside diameter: 20 inches
• Maximum coil outside diameter: 72 inches
• Maximum sheet length: 6,000 mm
• Leveler: 17-roll 4-Hi precision leveler
• Shear: Flying shear, 120 cuts per minute
• Shear motor: 20 kW
• Line direction: Left to right

Applications

• Producing flat steel sheets from coil for fabrication
• Blanks for stamping and pressing
• Sheet supply for service centres and metal processors
• Flat stock for panels and general metalwork

Commercial Details

• Make: Athader
• Year: 2001
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can the line handle? It takes coil up to 1,500 mm wide and 2.5 mm thick, weighing up to 25 t, with a maximum outside diameter of 72 inches.
• How fast does the shear cut? The flying shear is rated at 120 cuts per minute.
• What is the longest sheet it can produce? The maximum sheet length is 6,000 mm.
• What should I ask when enquiring? Ask for photos or video of the line running, the condition of the leveler rolls and shear blades, the electrics and control, and which components are included. Also ask about inspection, loading and shipping.