Used Automatic Feed 507272 2 Arm Turnstile | Galaxie Corporation, Wayne, Michigan, USA

This used Automatic Feed model 507272 2 arm turnstile is available from Galaxie Corporation. A turnstile holds coils on rotating arms so they can be loaded and fed into a line.

Each arm is rated for 50,000 lb (the page gives imperial units). The arms are 89.5 in long, the machine sits on a 60 in x 60 in square base plate, and an AC motor drives the rotation.

Key Features

• AC motor powers the rotation
• Arms channelled for C-hook loading, 9.25 in wide x 13 in deep
• Avon bearing, part no. 10298-2
• 60 in x 60 in square base plate

Technical Specifications

• Make: Automatic Feed
• Model: 507272
• Type: Turnstile
• Number of arms: 2
• Capacity: 50,000 lb per arm
• Coil ID: 20 in (18.5 in physical dimension corner to corner)
• Arm length: 89.5 in
• Height, floor to top of arm: Approx. 89.5 in
• Swing radius: Approx. 98 in
• Base plate: 60 in x 60 in square
• Rotation drive: AC motor
• Bearing: Avon 10298-2

Applications

• Holding and feeding heavy steel coils into slitting lines
• Coil loading for presses and blanking lines
• Coil handling ahead of roll forming and processing lines

Commercial Details

• Make: Automatic Feed
• Model: 507272
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What is the capacity of this turnstile? Each of its two arms is rated for 50,000 lb.
• How are coils loaded onto it? The arms are channelled for C-hook use, with a channel 9.25 in wide and 13 in deep.
• How is it driven? An AC motor powers the rotation.
• What should I ask when enquiring? Ask for photos or video of the turnstile rotating under power, the motor and electrical details, whether any controls are included, its condition, and loading and shipping arrangements.