Used Automatic Feed 78" Precision Leveler | Galaxie Corporation, Wayne, Michigan, USA

This used Automatic Feed precision leveler is available from Galaxie Corporation. It flattens metal strip and sheet up to 78 inches wide and 0.135 inches thick.

It has 17 work rolls of 2.25 inch diameter on an 82.625 inch roll face and is set up for mild and high-strength steels. The leveler uses an interchangeable cassette design, and one cassette is included.

Key Features

• Spiral groove intermediate backups
• 7 flights of cam-type backups, up and down
• Motorised wedge adjustment of the 5 centre flights of backups
• Interchangeable cassette design, one cassette included
• 15 ton Joyce ball screw jacks
• Valves, Graco lube system and I/Os mounted on the leveler frame
• Replacement for the one damaged work roll has been purchased and is included

Technical Specifications

• Width: 78 in
• Thickness range: 0.019–0.135 in
• Materials: Mild and high-strength steels
• Number of work rolls: 17
• Work roll diameter: 2.25 in
• Work roll face: 82.625 in
• Gearbox: Brad Foote, 147.35 HP, 1500 RPM, 2.84:1 ratio
• Jacks: 15 ton Joyce ball screw jacks
• Direction of operation: Right to left
• Pass height: 54 in
• Entry to exit distance (less exit pinch rolls): 59 in
• Motor: Not included; original motor was 110 kW (147.5 HP), 1500 RPM, 280MD frame
• Controls: No PLC or HMI included

Applications

• Flattening steel coil and sheet before blanking or cutting
• Levelling mild and high-strength steel strip
• Preparing flat stock for stamping and fabrication

Commercial Details

• Make: Automatic Feed
• Year: 2006
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it level? It handles material up to 78 inches wide, from 0.019 to 0.135 inches thick.
• Is the drive motor included? No motor is included; the unit originally had a 110 kW (147.5 HP), 1500 RPM motor, and the Brad Foote gearbox is fitted.
• Does it come with controls? No PLC or HMI operator controls were received with it.
• What should I ask when enquiring? Ask for photos or video, the condition of the work rolls and backups, details of the cassette and spare roll included, the motor and control requirements, and loading and shipping arrangements.