Used Automatic Feed Trapezoid Oscillating Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Automatic Feed trapezoid oscillating shear is available from Galaxie Corporation. It cuts strip or sheet to angled and trapezoid shapes using a programmable shear angle.

It handles material 72 inches wide and up to .100 inches thick, with a 75 horsepower AC motor and a shear speed of 18–70 strokes per minute.

Key Features

• Oscillating/trapezoid shear assembly
• Cassette-type dies, with multiple dies available
• Hydraulic die clamping
• Double or single sided traps
• Programmable cutting angle
• 75 HP AC motor with Series 2400 modular flux vector AC inverter

Technical Specifications

• Brand: Automatic Feed
• Type: Angle shear (trapezoid oscillating)
• Width: 72 inches
• Maximum thickness: .100 inches
• Material thickness range: 0.020"–0.100"
• Material yield strength: 25,000–40,000 PSI
• Shear speed: 18–70 SPM
• Shear angle: 30 degrees maximum, plus or minus
• Shear stroke: 6 inches
• Shear shut height: 30 inches
• Motor: 75 HP AC, 1150 RPM
• Drive: Series 2400 modular flux vector AC inverter
• Stock number: 604849A

Applications

• Cutting trapezoid and angled blanks from coil or strip
• Producing angled blanks for metal fabrication
• Cutting thin-gauge steel strip to shape in coil processing lines

Commercial Details

• Make: Automatic Feed
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material thickness can it cut? It is set up for material from 0.020" to 0.100" thick, with a yield strength of 25,000–40,000 PSI.
• How fast does it run? The shear runs at 18–70 strokes per minute.
• What cutting angle is available? The angle is programmable, up to 30 degrees maximum plus or minus.
• What should I ask when enquiring? Ask for photos or video of the shear running, which dies and tooling are included, the condition of the drive and electrics, the voltage requirements, and loading and shipping arrangements.