Used Braner 10,000 lb x 72 in Coil Downlayer | Galaxie Corporation, Wayne, Michigan, USA

This used Braner downlayer is available from Galaxie Corporation. It is rated for coils weighing 10,000 pounds with an outside diameter of 72 inches.

It has a 90-degree discharge, face-driven rolls powered by a hydraulic motor, and a hydraulic cylinder-actuated horn. The two 4 in bore tipping cylinders are missing from the machine but can be supplied.

Key Features

• 90-degree discharge
• Hydraulic motor driven face-driven rolls
• Hydraulic cylinder-actuated horn
• Parker hydraulic valves
• Requires a small pit under the horn enclosure

Technical Specifications

• Make: Braner
• Type: Downlayer
• Coil weight: 10,000 lb
• Coil OD: 72 in
• Discharge: 90 degree
• Drive rolls: 3.5 in dia. x 78.5 in face, driven
• Roll shafts: 1 in hex on 7 in centres
• Drive: Hydraulic motor
• Horn length: Approx. 29 in
• Height to top of horn, raised: Approx. 67.5 in from floor
• Tipping cylinders: (2) 4 in bore hydraulic (missing, can be supplied)
• Pass line height: 36 in
• Pit under horn enclosure: Approx. 16 in L x 16 in W x 8 in deep
• Overall size: 92 in L-R x 97 in F-B

Applications

• Placing coils onto uncoiling or processing lines
• Coil handling in metal service centres
• Feeding slitting and cut-to-length lines

Commercial Details

• Make: Braner
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size does this downlayer handle? It is rated for coils up to 10,000 pounds with a 72 inch outside diameter.
• Is anything missing from the machine? The two 4 in bore hydraulic tipping cylinders are missing but can be supplied.
• Does it need any special installation? Yes, it requires a small pit under the horn enclosure, approximately 16 in x 16 in x 8 in deep.
• What should I ask when enquiring? Ask about photos or video under power, inspection, the supply of the tipping cylinders, hydraulic power unit and controls, and loading and shipping arrangements.