Used Braner 11265-HK Scrap Chopper | Galaxie Corporation, Wayne, Michigan, USA

This used Braner 11265-HK scrap chopper is available from Galaxie Corporation. It was built in 1997 for a 72" wide slitting line and cuts edge trim scrap into short pieces.

It has two chopper heads, handles scrap up to 1.5" wide and is rated for 0.015"–0.048" thick material with its existing 10 HP drive motor. An exit scrap conveyor is included.

Key Features

• Two chopper heads
• Hydraulic motor powered head positioning
• 10 HP DC drive motor with blower, supplied without controls
• Right angle reducer with 5:1 ratio
• Exit scrap conveyor mounted on wheels with a 24" wide slat conveyor opening

Technical Specifications

• Model: 11265-HK
• Year: 1997
• Designed for: 72" wide slitting line
• Width: 72 inches
• Thickness capacity: 0.015"–0.048" with existing 10 HP drive motor
• Previously used on: 0.075" thick x 0.500" wide mild steel
• Maximum scrap width: 1.5"
• Maximum line speed: 900 FPM at 0.048" thick mild steel
• Chopper heads: 2
• Drive motor: 10 HP DC with blower, less controls, 850/2550 RPM, 500 V
• Reducer: Right angle, 5:1 ratio
• Exit conveyor size: 15' L x 38" W x 46" high
• Conveyor motor: 0.75 HP Leeson AC, 1725 RPM, 208–230/460 V
• Chopper dimensions: 130" L x 28" W x 35" high
• Drive dimensions: 60" L x 30" W x 36" high

Applications

• Chopping edge trim scrap from coil slitting lines
• Scrap handling in steel service centres
• Processing mild steel strip scrap in light gauges

Commercial Details

• Make: Braner
• Model: 11265-HK
• Year: 1997
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness can it chop? It is rated for 0.015"–0.048" thick material with the existing 10 HP drive motor, at up to 900 FPM on 0.048" mild steel.
• What is the maximum scrap width? It handles scrap up to 1.5" wide.
• Does it include a conveyor? Yes, it comes with a wheel-mounted exit scrap conveyor, 15' long with a 24" wide slat opening.
• What should I ask when enquiring? Ask for photos or video of it running, whether drive controls are needed as the DC motor is supplied without them, the condition of the chopper heads and blades, and loading and shipping arrangements.