Used Braner 60" x .135" Loop Cut-To-Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Braner (Cincinnati/Braner) loop cut-to-length line with Herr Voss 6HI leveler is available from Galaxie Corporation. It uncoils, levels and shears steel coil into flat sheets, with a looping pit between the uncoiler and the feed.

It handles coil up to 60" wide and 40,000 lb, in thicknesses from .018" to .135", and cuts sheet lengths from 15" to 192". The Braner line was upgraded mechanically and electrically in 2015, including a new Braner servo roll feed.

Key Features

• Loopco 3-arm entry turnstile and 30,000 lb Cincinnati L-type coil car
• 40,000 lb Cincinnati mandrel uncoiler with peeler table, edge guides and coated power pinch rolls
• Braner crop shear, Cincinnati dual edge trimmer and dual rotary scrap choppers
• Herr Voss 6HI precision leveler, model LH-72-1.750-19-7
• Looping pit with cascade rolls and cross-over table
• Braner servo roll feed, PVC applicator and Wysong high-speed shear
• Dual belt gauging table, reject table with side discharge and drop-type stacker with air blower
• Parker 590+ Series 2 digital drives, Allen Bradley PLC, AC servo stacker controls and operator touch screen

Technical Specifications

• Make: Braner (Cincinnati/Braner)
• Coil width: 15"–60"
• Thickness range: .018"–.135"
• Coil weight: 40,000 lb
• Coil ID: 16", 20" or 24"
• Maximum coil OD: 72"
• Sheet length: 15"–192"
• Stacker weight capacity: 10,000 lb
• Leveler: Herr Voss 6HI precision, model LH-72-1.750-19-7
• Drives and controls: Parker 590+ Series 2 digital drives, Allen Bradley PLC, touch screen

Applications

• Flat steel sheets cut to length for fabrication
• Blanks for stamping and forming
• Sheet stock for service centres and metal processors

Commercial Details

• Make: Braner
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes does the line take? It takes coil 15"–60" wide, up to 40,000 lb and 72" OD, with 16", 20" or 24" ID.
• What sheet lengths and thicknesses can it produce? Sheet lengths run from 15" to 192" in material from .018" to .135" thick.
• Has the line been upgraded? The Braner was upgraded mechanically and electrically in 2015, with a new Braner servo roll feed.
• What should I ask when enquiring? Ask about seeing the complete line inspected under power and operating, which is available, plus which equipment and spares are included, the electrical supply and control details, and loading and shipping arrangements.